In this section, we'll set up Linux so that you're in a position to get Oracle 8i from the CD that they sent you into your hard-disk.
The Oracle installation process begins when you've built your PC, installed Linux, configured it and connected it to your network.
I think that the most important part of the prerequisites is not to underestimate them. Oracle is a very big and complex application and you won't get the best out of it if you skimp too much on the hardware.
My biggest mistake was to assume that Oracle were joking when they said that you need 128Mb of RAM. I've installed Oracle a couple of times on Sun servers with that much, why would I need more on a CISC machine?
Believe Oracle not my gut. My machine with 32Mb of Ram ground on for less than half an hour before I realised that it was hopeless.
I was trying to use the bare minimum of hardware, and that's generally a bad idea. If you can't afford the hardware you certainly won't be able to afford the licences!
Things to look for on a production server are many disks, possibly RAIDed, and fast CPU's. Database access is relatively easy to break down into smaller parallel phases so having a number of processors really does help.
On the other hand, any machine that can run Linux and that has enough memory should be in with a chance. My other machine, the one I used for the rest of this document, is fine as a development machine. It is a Celeron 466Mhz with 128Mb of memory, an 8Gb hard disk, an Intel graphics card and a DM9102 network card.
Oracle seem to have done most of their development on RedHat Linux 6.0. For a fuss-free installation, do the same. I've heard horror stories about trying to get it installed on other distributions.
However, anything like RedHat should also do the trick. A recent version of Mandrake or SuSE should be fine (SuSE, in fact, are fairly active in supporting Oracle), and newer versions of RH pose no problems either.
Now that you've decided on which RedHat-like distribution you're going to use, you'll need to work out which options to set and which of the vast number of packages need to be installed to make Oracle work.
Firstly you need two to three times the amount of memory you have for your swap space. (You'll need around 200Mb of memory, real or virtual, just to run the installer!) Note that contrary to popular opinion, Linux swap partitions can be larger than 128Mb.
The arrangements of your other partitions can also be important. Make sure that the Oracle software is on a different partition to your operating system, and make sure that the Oracle datafiles are on yet another partition. The idea here is to make sure that your datafiles do not get fragmented. (In a live environment, you're likely to have a number of disk with Oracle spread across them. There are a number of good books that you consult for more information on this.)
As for the software, I took the easy option and installed just about everything. You certainly need all the 'base' packages, X Windows (the installation routine is a Java GUI) and the development tools regardless of whether you intend doing any coding or not. Compared to the size of Oracle and your databases a Linux distribution is tiny, probably less than a gigabyte. It's worth installing it all for an easy life!
The documentation suggests that you make changes to the Linux kernel so you can get more shared memory. Since this is so difficult in Linux (unlike most commercial Unix's you have to recompile the kernel), the approach I took was to go ahead with the installation anyway. The default RedHat Linux settings worked, although you may have to change them for a larger development or production system.
Note that some people have had to recompile the kernel to get Oracle to work at all. I guess it must depend on the other software that you're running on the same machine.
Follow the instructions in the Oracle documentation (on the installation CD in HTML format) and the Linux Kernel HOWTO to build your new kernel.
Using LinuxConf (or whatever other method you feel comfortable with), you need to add a new group called "dba" and a new user called "oracle", which should belong to your newly created "dba" group.
You can make any other user a DBA by putting them in the DBA group. If you have several DBA's this is probably a good idea for auditing purposes.
If you check the official documentation, you'll find that Oracle recommend the Blackdown Java Runtime Environment version 1.1.6v5. That's what they mean. Don't think 'newer versions will be less buggy' as the installer probably won't work. And don't think, 'I'll be developing software so I'll just get the JDK,' as that won't work either.
There is one caveat to using this version of the JRE: the Oracle
installer seems to be hard-coded to expect the JRE executable to be at
/usr/local/jre/bin/jre. While this is inconvenient, it does
not mean that you have to install it there.
I performed the following steps to get a working copy of the JRE:
cd /usr/local
bzip2 -d -c jre-1.1.6-v5-glibc-x86.tar.bz2 | tar xvf -
ln -s jre116_v5 jre
I would recommend that you do use 128Mb of RAM or more. I think it would be difficult to get any serious work done with less.
However, if you disable the Java option and set all the shared memory settings to be relatively small, there's no reason why it shouldn't work. I've heard success stories with 64Mb. You're probably not going to get away with 32Mb, though.
There is a caveat. You may only need half of what Oracle recommends to run the thing, but to install it their number starts to make sense. I've heard reports of the installer using 150Mb of memory and I've seen it well over 120Mb myself. If you have 64Mb or less of memory, make sure you have lots of swap space and patience.
An alternative if you absolutely can't add more memory: install Oracle
on another, bigger machine and copy across the $ORACLE_HOME
directory. You'll need to make sure that you have all the same users
and groups (preferably with the same numeric codes) and take special
care with SUID executables like $ORACLE_HOME/bin/oracle/.
I'm still running 6.0 myself, so all I can say is that a number of people have claimed success with this configuration.
At the time of writing, Oracle 8i has been certified with RedHat 6.0 and "Certification for other distributions is currently in progress" (Oracle 8i Patch FAQ).
Oracle specify the Linux kernel version 2.2 or above and GLIBC version 2.1 with any window manager. In theory, any distribution that meets these requirements should work.
In practice, Oracle may not support it and you may have more problems trying to complete the installation. Unless you have a very good reason to do otherwise I suggest you stick to RedHat 6.0 with all the patches you can get hold of.
There's no obvious reason why it shouldn't work -- I used 2.3.19 for a while because it supported my network card and the stable kernel at the time didn't -- but unless there's a pressing need it's certainly safest to stay well clear. I switched back to the stable series as soon as the driver was included.
Firstly, if you're brave, have a very fast Internet connection or inexhaustible patience (and unmetered access) you can download it from Oracle Technet. Beware: it's nearly 200Mb, and 8.1.6 is even bigger.
A better option is to get the CD. Oracle sometimes offer to send you a free development CD when you join Technet. It's certainly worth spending some time looking round their web site for that. Alternatively, you can buy them from the Oracle Store for around $40. It includes lots of other software too and comes on 15 discs.