| Red Hat Linux 7.1: Official Red Hat Linux Reference Guide | ||
|---|---|---|
| Indietro | Appendice A. Parametri generali dei moduli | Avanti |
Tabella A-3. Parametri SCSI
| Hardware | Modulo | Parametri |
|---|---|---|
| Controller dei dischi 3ware | 3w-xxxx.o | |
| NCR53c810/820/720, NCR53c700/710/700-66 | 53c7,8xx.o | |
| Driver AM53/79C974 (PC-SCSI) | AM53C974.o | |
| Quasi tutte le schede Buslogic (adesso Mylex) con numero di parte "BT" | BusLogic.o | BusLogic_Options=option,option,… |
| Controller RAID Mylex DAC960 | DAC960.o | |
| SCSI basato su MCR53c406a | NCR53c406a.o | |
| Initio INI-9100UW | a100u2w.o | a100u2w=io,IRQ,scsi_id |
| Adaptec AACRAID | aacraid.o | |
| Schede SCSI Advansys | advansys.o | |
| Adaptec AHA-152x | aha152x.o | aha152x=io,IRQ,scsi_id |
| Adaptec AHA 154x amd 631x-based | aha1542.o | |
| Adaptec AHA 1740 | aha1740.o | |
| Adaptec AHA-274x, AHA-284x, AHA-29xx, AHA-394x, AHA-398x, AHA-274x, AHA-274xT, AHA-2842, AHA-2910B, AHA-2920C, AHA-2930/U/U2, AHA-2940/W/U/UW/AU/, U2W/U2/U2B/, U2BOEM, AHA-2944D/WD/UD/UWD, AHA-2950U2/W/B, AHA-3940/U/W/UW/, AUW/U2W/U2B, AHA-3950U2D, AHA-3985/U/W/UW, AIC-777x, AIC-785x, AIC-786x, AIC-787x, AIC-788x , AIC-789x, AIC-3860 | aic7xxx.o | aic7xxx=string |
| Controller SCSI PCI ACARD ATP870U | atp870u.o | |
| Controller Compaq Smart Array 5300 | cciss.o | |
| Controller RAID Compaq Smart/2 | cpqarray.o | |
| Controller FibreChannel Compaq | cpqfc.o | |
| Domex DMX3191D | dmx3191d.o | |
| Data Technology Corp DTC3180/3280 | dtc.o | |
| Adattatori host SCSI DTP (EATA/DMA) PM2011B/9X ISA, PM2021A/9X ISA, PM2012A, PM2012B, PM2022A/9X EISA, PM2122A/9X, PM2322A/9X, SmartRAID PM3021, PM3222, PM3224 | eata.o | eata=port0,port1,port2,… options OR eata io_port=port0,port1,port2,… option=value |
| Adattatori SCSI DTP PM2011, PM2021, PM2041, PM3021, PM2012B, PM2022, PM2122, PM2322, PM2042, PM3122, PM3222, PM3332, PM2024, PM2124, PM2044, PM2144, PM3224, PM3334 | eata_dma.o | |
| Schede DTP EATA-PIO | eata_pio.o | |
| Array di rete Sun Enterprise (FC-AL) | fcal.o | |
| Future Domain TMC-16xx SCSI | fdomain.o | |
| NCR5380 (generic driver) | g_NCR5380.o | |
| Controlloer RAID ICP | gdth.o | |
| Driver Block I2O | i2o_block.o | |
| Adattatore SCSI porta parallela IOMEGA MatchMaker | imm.o | |
| Scheda SCSI ISA Always IN2000 | in2000.o | in2000=setup_string:value O in2000 setup_string=value |
| Adattatori host SCSI Initio INI-9X00U/UW | initio.o | |
| ServeRAID IBM | ips.o | |
| AMI MegaRAID 418, 428, 438, 466, 762 | megaraid.o | |
| Controller SCSI NCR con chipset 810/810A/815/ 825/825A/860/875/876/895 | ncr53c8xx.o | ncr53c8xx=option1:value1,option2:value2,… OR ncr53c8xx="option1:value1 option2:value2…" |
| Pro Audio Spectrum/Studio 16 | pas16.o | |
| PCI-2000 IntelliCache | pci2000.o | |
| RAID EIDE PCI-2220I | pci2220i.o | |
| Array SparcSTORAGE | pluto.o | |
| Adattatore host SCSI porta parallela IOMEGA PPA3 | ppa.o | |
| Perceptive Solutions PSI-240I EIDE | psi240i.o | |
| Qlogic 1280 | qla1280.o | |
| Qlogic 2x00 | qla2x00.o | |
| QLogic Fast SCSI FASXXX ISA/VLB/PCMCIA | qlogicfas.o | |
| QLogic ISP2100 SCSI-FCP | qlogicfc.o | |
| Schede SCSI QLogic ISP1020 Intelligent IQ-PCI, IQ-PCI-10, IQ-PCI-D | qlogicisp.o | |
| SCSI SBUS Qlogic ISP1020 | qlogicpti.o | |
| Seagate ST-01/02, Future Domain TMC-8xx | seagate.o | |
| Future Domain TMC-885, TMC-950 | seagate.o | controller_type=2 base_address=base_addr irq=IRQ |
| Schede con chipset sym53c416 | sym53c416.o | sym53c416=PORTBASE,[IRQ] O sym53c416 io=PORTBASE irq=IRQ |
| Adattatore host SCSI Trantor T128/T128F/T228 | t128.o | |
| Tekram DC-390(T) PCI | tmscsim.o | |
| UltraStor 14F/34F (non 24F) | u14-34f.o | |
| UltraStor 14F, 24F e 34F | ultrastor.o | |
| WD7000 Series | wd7000.o |
Di seguito sono riportati alcuni esempi di moduli utilizzati: