Bidirectional Forwarding Detection (bfd)
----------------------------------------

 Charter
 Last Modified: 2007-04-02

 Current Status: Active Working Group

 Chair(s):
     David Ward  <dward@cisco.com>
     Jeffrey Haas  <jhaas@pfrc.org>

 Routing Area Director(s):
     Ross Callon  <rcallon@juniper.net>
     David Ward  <dward@cisco.com>

 Routing Area Advisor:
     Ross Callon  <rcallon@juniper.net>

 Technical Advisor(s):
     Dave Katz  <dkatz@juniper.net>

 Mailing Lists: 
     General Discussion:rtg-bfd@ietf.org
     To Subscribe:      rtg-bfd-request@ietf.org
         In Body:       With a subject line: subscribe
     Archive:           ftp://ftp.ietf.org/ietf-mail-archive/rtg-bfd/

Description of Working Group:

The BFD Working Group is chartered to specify a protocol for
bidirectional forwarding detection (BFD), as well as extensions to be
used within the scope of BFD and IP routing, or protocols such as MPLS
that are based on IP routing, in a way that will encourage multiple,
inter-operable vendor implementations.

BFD is a protocol intended to detect faults in the bidirectional path
between two forwarding engines, including physical interfaces,
subinterfaces, data link(s), and to the extent possible the forwarding
engines themselves, with potentially very low latency. It operates
independently of media, data protocols, and routing protocols. An
additional goal is to provide a single mechanism that can be used for
liveness detection over any media, at any protocol layer, with
a wide range of detection times and overhead, to avoid a proliferation
of different methods.

Important characteristics of BFD include:

- Simple, fixed-field encoding to facilitate implementations in 
hardware

- Independence of the data protocol being forwarded between two 
systems.
  BFD packets are carried as the payload of whatever encapsulating
  protocol is appropriate for the medium and network.

- Path independence: BFD can provide failure detection on any kind of
  path between systems, including direct physical links, virtual
  circuits, tunnels, MPLS LSPs, multihop routed paths, and 
  unidirectional links (so long as there is some return path, of 
  course.)

- Ability to be bootstrapped by any other protocol that automatically 
  forms peer, neighbor or adjacency relationships to seed BFD endpoint
  discovery.

At this time the WG is chartered to complete the following work items
(additional items will require rechartering):

1. Develop the base BFD protocol specification and submit it to the 
IESG
   for publication as a Proposed Standard
                                                                       
  2. Document BFD encapsulation and usage profile for single-hop IPv4
   and IPv6 adjacencies (e.g, physical links and IP/GRE tunnels for 
   static routes, IS-IS, OSPFv2, OSPFv3, single-hop BGP) and submit the
   specification to the IESG for publication as a Proposed Standard.
                                                                       
3. Document BFD encapsulation and usage profile for MPLS LSPs and 
submit
   the specification to the IESG for publication as a Proposed 
Standard.
                                                                       
                                                                       
 
   
4. Develop the MIB module for BFD and submit it to the IESG for
   publication as a Proposed Standard.
                                                                       
5. Document BFD encapsulation and usage profile for multi-hop IPv4
   and IPv6 adjacencies (e.g. OSPF virtual links and iBGP sessions) 
   and submit the specification to the IESG for publication as a 
   Proposed Standard.

Topics for Possible Future Work:

1. Document BFD directly over 802.3 in close collaboration and
   synchronization with the IEEE.

 Goals and Milestones:

   Aug 2004       Submit the base protocol specification to the IESG to be 
                considered as a Proposed Standard. 

   Aug 2004       Submit BFD encapsulation and usage profile for single-hop IPv4 
                and IPv6 adjacencies to the IESG to be considered as a Proposed 
                Standard 

   Aug 2004       Submit BFD encapsulation and usage profile for MPLS LSPs to the 
                IESG to be considered as a Proposed Standard 

   Nov 2004       Submit BFD MIB to the IESG to be considered as Proposed 
                Standard. 

   Feb 2005       Submit BFD encapsulation and usage profile for multi-hop IPv4 
                and IPv6 adjacencies to the IESG to be considered as a Proposed 
                Standard 


 Internet-Drafts:

  No Current Internet-Drafts.

 Request For Comments:

  None to date.