Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
Table of Contents
Table of Contents
1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . 1
2. OBJECTS . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.1. Object Definitions . . . . . . . . . . . . . . . 2
2.2. TL1 System Group . . . . . . . . . . . . . . . . 3
2.3. TL1 Interfaces Group . . . . . . . . . . . . . . 4
2.4. TL1 IP Group . . . . . . . . . . . . . . . . . . 8
2.5. TL1 TCP Group . . . . . . . . . . . . . . . . . 22
2.6. TL1 EGP Group . . . . . . . . . . . . . . . . . 26
2.7. TL1 SNMP Group . . . . . . . . . . . . . . . . 35
2.8. TL1 BRE Group . . . . . . . . . . . . . . . . . 39
2.9. TL1 RIP Group . . . . . . . . . . . . . . . . . 55
2.10. TL1 X25 Group . . . . . . . . . . . . . . . . . 64
2.11. TL1 FDDI Group . . . . . . . . . . . . . . . . 82
2.12. TL1 STAP Group . . . . . . . . . . . . . . . . 122
2.13. TL1 PPP Group . . . . . . . . . . . . . . . . . 141
2.14. TL1 SRTB Group . . . . . . . . . . . . . . . . 153
2.15. TL1 OSPF Group . . . . . . . . . . . . . . . . 185
2.16. TL1 TOK Group . . . . . . . . . . . . . . . . . 206
2.17. TL1 IPX Group . . . . . . . . . . . . . . . . . 208
2.18. TL1 XNS Group . . . . . . . . . . . . . . . . . 237
i
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
1. INTRODUCTION
This document provides the initial version of the Time/Lan 100
Management Information Base (TL1 MIB) for use with network
management protocols over TCP/IP-based internets. This document
does not include those managed objects identified in RFC 1158;
however, those objects are supported.
2. OBJECTS
The objects are arranged into the following groups:
-- TL1 System Group
-- TL1 Interfaces Group
-- TL1 IP Group
-- TL1 TCP Group
-- TL1 EGP Group
-- TL1 SNMP Group
-- TL1 BRE Group
-- TL1 RIP Group
-- TL1 X25 Group
-- TL1 FDDI Group
-- TL1 STAP Group
-- TL1 PPP Group
-- TL1 SRTB Group
-- TL1 OSPF Group
-- TL1 TOK Group
-- TL1 IPX Group
-- TL1 XNS Group
The following groups have been reserved (see Object Definitions),
but no objects have yet been identified within these groups:
-- TL1 AT (Address Translation) Group
-- TL1 ICMP Group
-- TL1 UDP Group
-- TL1 FR Group
-- TL1 TFTP Group
-- TL1 TELNET Group
1
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
2.1. Object Definitions
enterprises see RFC 1158
timeplex OBJECT IDENTIFIER ::= { enterprises 16 }
umgmt OBJECT IDENTIFIER ::= { timeplex 2 }
umib OBJECT IDENTIFIER ::= { umgmt 1 }
tl1mib OBJECT IDENTIFIER ::= { umgmt 2 }
tl1system OBJECT IDENTIFIER ::= { tl1mib 1 }
tl1interfaces OBJECT IDENTIFIER ::= { tl1mib 2 }
tl1at OBJECT IDENTIFIER ::= { tl1mib 3 }
tl1ip OBJECT IDENTIFIER ::= { tl1mib 4 }
tl1icmp OBJECT IDENTIFIER ::= { tl1mib 5 }
tl1tcp OBJECT IDENTIFIER ::= { tl1mib 6 }
tl1udp OBJECT IDENTIFIER ::= { tl1mib 7 }
tl1egp OBJECT IDENTIFIER ::= { tl1mib 8 }
tl1snmp OBJECT IDENTIFIER ::= { tl1mib 11 }
tl1bre OBJECT IDENTIFIER ::= { tl1mib 12 }
tl1rip OBJECT IDENTIFIER ::= { tl1mib 13 }
tl1x25 OBJECT IDENTIFIER ::= { tl1mib 14 }
tl1fddi OBJECT IDENTIFIER ::= { tl1mib 15 }
tl1stap OBJECT IDENTIFIER ::= { tl1mib 16 }
tl1ppp OBJECT IDENTIFIER ::= { tl1mib 18 }
tl1srtb OBJECT IDENTIFIER ::= { tl1mib 19 }
tl1ospf OBJECT IDENTIFIER ::= { tl1mib 20 }
tl1tok OBJECT IDENTIFIER ::= { tl1mib 21 }
tl1ipx OBJECT IDENTIFIER ::= { tl1mib 22 }
tl1xns OBJECT IDENTIFIER ::= { tl1mib 23 }
tl1fr OBJECT IDENTIFIER ::= { tl1mib 24 }
tl1tftp OBJECT IDENTIFIER ::= { tl1mib 25 }
tl1telnet OBJECT IDENTIFIER ::= { tl1telnet 26 }
2
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
2.2. TL1 System Group
OBJECT:
tl1systemAction { tl1system 1 }
Syntax:
INTEGER {
normal(0),
reset(1),
shutdown(2)
}
Definition:
This is the system action flag. 'Reset' causes the network
device to reinitialize itself; 'shutdown' brings the network
device to a state where it can be restarted only by manually
resetting the device.
Access:
read-write.
Status:
mandatory.
Default:
normal(0)
OBJECT:
tl1systemReboots { tl1system 2 }
Syntax:
INTEGER
Definition:
This is the number of times the system has rebooted due to
an unrecoverable error condition. If initialized to -1, the
system will not reboot following an unrecoverable error.
Access:
read-only.
Status:
mandatory.
3
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1systemErrorCode { tl1system 3 }
Syntax:
INTEGER
Definition:
This is the error code for the last system reboot. It is a
32-bit value, where the upper 16 bits contain the process ID
and the lower 16 bits contain the error code.
Access:
read-only.
Status:
mandatory.
2.3. TL1 Interfaces Group
OBJECT:
tl1ifTable { tl1interfaces 1 }
Syntax:
SEQUENCE OF tl1ifEntry
Definition:
This is a list of the TL1 interface entries. Each entry is
instantiated by logical interface number (1..ifNumber).
Access:
read-write.
Status:
mandatory.
4
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ifEntry { tl1ifTable 1 }
Syntax:
tl1ifEntry ::= SEQUENCE {
tl1ifIpAddr
IpAddress,
tl1ifSubnetMask
IpAddress,
tl1ifProxyARP
INTEGER,
tl1ifType
INTEGER,
tl1ifHardwareAddress
OCTET STRING
}
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ifIpAddr { tl1ifEntry 1 }
Syntax:
IpAddress
Definition:
This is the Internet address for the specified interface.
Access:
read-write.
Status:
mandatory.
5
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ifSubnetMask { tl1ifEntry 2 }
Syntax:
IpAddress
Definition:
This is the Internet address subnet mask for the specified
interface.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ifProxyARP { tl1ifEntry 3 }
Syntax:
INTEGER {
disable(0),
enabled(1)
}
Definition:
This flag enables or disables Proxy ARP for the specified
interface.
Access:
read-write.
Status:
mandatory.
Default:
disabled(0)
6
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ifType { tl1ifEntry 4 }
Syntax:
INTEGER {
not-configured(0),
ethernet-II(1),
802.3(2),
fddi(3),
lapb(4),
x25(5),
ppp(6),
token-ring(7)
}
Definition:
This value defines the type of interface present for the
specified interface.
Access:
read-write.
Status:
mandatory.
Default:
not-configured(0)
OBJECT:
tl1ifHardwareAddress { tl1ifEntry 5 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is the hardware address for the specified interface.
Access:
read-write.
Status:
mandatory.
7
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
2.4. TL1 IP Group
OBJECT:
tl1ipLoopback { tl1ip 2 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
This flag indicates that packets destined for our own
interface attached to a Packet Switched Network are
delivered anyway to test loop back.
Access:
read-write.
Status:
mandatory.
Default:
FALSE(0)
OBJECT:
tl1ipRedirectTo { tl1ip 3 }
Syntax:
INTEGER (1..65535)
Definition:
This is the interval in seconds between the clearing of the
redirect tables.
Access:
read-write.
Status:
mandatory.
Default:
1800
8
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipMaxRoutePids { tl1ip 4 }
Syntax:
INTEGER
Definition:
This is the maximum number of processes that perform
routing.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipRoutePidsTable { tl1ip 5 }
Syntax:
SEQUENCE OF tl1ipRoutePidsEntry
Definition:
This is a list of process IDs that determine the order in
which to search the routing protocol processes' routing
tables. For example, the value of tl1ipRoutePid.1"
identifies the process ID whose routing table is searched
first. The maximum number of entries in the list is given by
tl1ipMaxRoutePids'.
Access:
read-write
Status:
mandatory.
9
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipRoutePidsEntry { tl1ipRoutePidsTable 1 }
Syntax:
tl1ipRoutePidsEntry ::= SEQUENCE {
tl1ipRoutePid
INTEGER
}
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipRoutePid { tl1ipRoutePidsEntry 1 }
Syntax:
INTEGER {
Open-Shortest-Path-First(23),
Routing-Information-Protocol(7),
Exterior-Gateway-Protocol(8),
Internet-Protocol(1),
Static-Routes(0)
}
Definition:
This is an entry in the list of process IDs. A value of 255
indicates that the entry is not used.
Access:
read-write.
Status:
mandatory.
Default:
tl1ipRoutePidsEntry.1(23)
tl1ipRoutePidsEntry.2(7)
tl1ipRoutePidsEntry.3(8)
tl1ipRoutePidsEntry.4(1)
tl1ipRoutePidsEntry.5(0)
10
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipNbrStaticRoutes { tl1ip 6 }
Syntax:
INTEGER
Definition:
This is the number of static routes currently maintained in
non-volatile RAM.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipStaticRouteTable { tl1ip 7 }
Syntax:
SEQUENCE OF tl1ipStaticRouteEntry
Definition:
This is the static routing table. Each variable is
instantiated by an index (1..maximum number of IP static
routes).
Access:
read-write.
Status:
mandatory.
11
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipStaticRouteEntry { tl1ipStaticRouteTable 1 }
Syntax:
tl1ipStaticRouteEntry ::= SEQUENCE {
tl1ipStaticRouteNetwork
IpAddress,
tl1ipStaticRouteGateway
IpAddress,
tl1ipStaticRouteCost
INTEGER,
tl1ipStaticRouteOverride
INTEGER,
tl1ipStaticRouteMask
IpAddress
}
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipStaticRouteNetwork { tl1ipStaticRouteEntry 1 }
Syntax:
IpAddress
Definition:
This is the network address of the destination.
Access:
read-only.
Status:
mandatory.
12
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipStaticRouteGateway { tl1ipStaticRouteEntry 2 }
Syntax:
IpAddress
Definition:
This is the gateway address of the next hop to reach the
specified network address.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipStaticRouteCost { tl1ipStaticRouteEntry 3 }
Syntax:
INTEGER (0..255)
Definition:
This is the cost to route to the network address.
Access:
read-write.
Status:
mandatory.
Default:
0
13
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipStaticRouteOverride { tl1ipStaticRouteEntry 4 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
This flag indicates that this route should override the
dynamic route.
Access:
read-write.
Status:
mandatory.
Default:
FALSE(0)
OBJECT:
tl1ipStaticRouteMask { tl1ipStaticRouteEntry 5 }
Syntax:
IpAddress
Definition:
This is the subnet mask for the given network address.
Access:
read-write.
Status:
mandatory.
14
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipConfigIntfTable { tl1ip 8 }
Syntax:
SEQUENCE OF tl1ipConfigIntfEntry
Definition:
This is a table of parameters that configure IP on a per
interface basis. Each variable is instantiated by logical
interface number (1..ifNumber).
Access:
read-write
Status:
mandatory.
OBJECT:
tl1ipConfigIntfEntry { tl1ipConfigIntfTable 1 }
Syntax:
tl1ipConfigIntfEntry ::= SEQUENCE {
tl1ipRemoteg
INTEGER,
tl1ipNetMaxPkt
INTEGER,
tl1ipMasker
INTEGER
}
Access:
read-write.
Status:
mandatory.
15
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipRemoteg { tl1ipConfigIntfEntry 1 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
This flag indicates that the specified interface is an
intersite gateway link.
Access:
read-write.
Status:
mandatory.
Default:
FALSE(0)
OBJECT:
tl1ipNetMaxPkt { tl1ipConfigIntfEntry 2 }
Syntax:
INTEGER (65..65535)
Definition:
This is the maximum subnet packet size for the specified
interface.
Access:
read-write.
Status:
mandatory.
Default:
FDDI-interface(4479)
LAPB-interface(1500)
Ethernet-1(1492)
Ethernet-2(1500)
16
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipMasker { tl1ipConfigIntfEntry 3 }
Syntax:
INTEGER
Definition:
This flag indicates the device should emulate a gateway and
respond to the receipt of a MASK request.
Access:
read-write.
Status:
mandatory.
Default:
FALSE(0)
OBJECT:
tl1ipNumFilters { tl1ip 9 }
Syntax:
INTEGER
Definition:
This is the number of IP filters currently maintained in
non-volatile RAM.
Access:
read-write.
Status:
mandatory.
17
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipFilterTable { tl1ip 10 }
Syntax:
SEQUENCE OF tl1ipFilterEntry
Definition:
This is the IP filter table. Each variable is instantiated
by an IP filter table index (1 ... maximum number of IP
filter table entries).
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipFilterEntry { tl1ipFilterTable 1 }
Syntax:
tl1ipFilterEntry ::= SEQUENCE {
tl1ipFilterSrcMask
IpAddress,
tl1ipFilterSrcNet
IpAddress,
tl1ipFilterDstMask
IpAddress,
tl1ipFilterDstNet
IpAddress,
tl1ipFilterNbrExceptions
INTEGER
}
Access:
read-write.
Status:
mandatory.
18
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipFilterSrcMask { tl1ipFilterEntry 1 }
Syntax:
IpAddress
Definition:
This is the mask to be applied to the source IP address of
the incoming datagram.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipFilterSrcNet { tl1ipFilterEntry 2 }
Syntax:
IpAddress
Definition:
This is the source IP address to be filtered.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipFilterDstMask { tl1ipFilterEntry 3 }
Syntax:
IpAddress
Definition:
This is the mask to be applied to the destination IP address
of the incoming datagram.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipFilterDstNet { tl1ipFilterEntry 4 }
Syntax:
IpAddress
19
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
Definition:
This is the destination IP address to be filtered.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipFilterNbrExceptions { tl1ipFilterEntry 5 }
Syntax:
INTEGER
Definition:
This is the number of exceptions for this filter entry.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipFilterExceptionTable { tl1ip 11 }
Syntax:
SEQUENCE OF tl1ipFilterExceptionEntry
Definition:
This is the list of exceptions for this filter entry. Each
variable is instantiated by two indices; first, by an IP
filter table index (1 ... maximum number of IP filter table
entries). second, a filter exceptions index (1..maximum
number of filter exceptions).
Access:
read-write.
Status:
mandatory.
20
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipFilterExceptionEntry { tl1ipFilterExceptionTable 1 }
Syntax:
tl1ipFilterExceptionEntry ::= SEQUENCE {
tl1ipFilterExceptionSrcNet
IpAddress,
tl1ipFilterExceptionDstNet
IpAddress
}
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipFilterExceptionSrcNet { tl1ipFilterExceptionEntry 1 }
Syntax:
IpAddress
Definition:
This is the source IP address to be allowed.
Access:
read-write.
Status:
mandatory.
21
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipFilterExceptionDstNet { tl1ipFilterExceptionEntry 2 }
Syntax:
IpAddress
Definition:
This is the destination IP address to be allowed.
Access:
read-write.
Status:
mandatory.
2.5. TL1 TCP Group
OBJECT:
tl1tcpRetransTo { tl1tcp 1 }
Syntax:
INTEGER (1..65535)
Definition:
This is the initial message retransmission timeout in
milliseconds.
Access:
read-write.
Status:
mandatory.
Default:
300
22
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1tcpRtoMin { tl1tcp 2 }
Syntax:
INTEGER (1..65535)
Definition:
This is the minimum allowable retransmission timeout value in
milliseconds.
Access:
read-write.
Status:
mandatory.
Default:
50
OBJECT:
tl1tcpRtoMax { tl1tcp 3 }
Syntax:
INTEGER (1..65635)
Definition:
This is the maximum allowable retransmission timeout value in
milliseconds.
Access:
read-write.
Status:
mandatory.
Default:
60000
23
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1tcpWakeup { tl1tcp 4 }
Syntax:
INTEGER (1..16384)
Definition:
This is the periodic processing interval in milliseconds.
Access:
read-write.
Status:
mandatory.
Default:
100
OBJECT:
tl1tcpAckTime { tl1tcp 5 }
Syntax:
INTEGER (1..16384)
Definition:
This is the mandatory acknowledgement period in milliseconds.
Access:
read-write.
Status:
mandatory.
Default:
200
24
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1tcpTimeToLive { tl1tcp 6 }
Syntax:
INTEGER (1..255)
Definition:
This is the time to live in seconds provided to IP.
Access:
read-write.
Status:
mandatory.
Default:
60
OBJECT:
tl1tcpThruput { tl1tcp 7 }
Syntax:
INTEGER (1..255)
Definition:
This is the maximum number of outstanding messages per
connection.
Access:
read-write.
Status:
mandatory.
Default:
8
25
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1tcpFlowAck { tl1tcp 8 }
Syntax:
INTEGER (1..tl1tcpThruput)
Definition:
This is the number of messages received before sending an
acknowledgement.
Access:
read-write.
Status:
mandatory.
Default:
2
2.6. TL1 EGP Group
OBJECT:
tl1egpMaxNbrs { tl1egp 1 }
Syntax:
INTEGER
Definition:
This is the maximum number of EGP neighbors permitted for this
gateway.
Access:
read-only.
Status:
mandatory.
26
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1egpNumberTrustedNbrs { tl1egp 2 }
Syntax:
INTEGER (0..tl1egpMaxNbrs)
Definition:
This is the maximum number of neighbors to be acquired.
Access:
read-write.
Status:
mandatory.
Default:
0
OBJECT:
tl1egpNumberNbrs { tl1egp 3 }
Syntax:
INTEGER (0..tl1egpNumberTrustedNbrs)
Definition:
This is the number of neighbors recommended.
Access:
read-write.
Status:
mandatory.
Default:
0
27
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1egpNbrTable { tl1egp 4 }
Syntax:
SEQUENCE OF tl1egpNbrEntry
Definition:
This is the EGP gateway neighbor list. The first entry in the
list is entry number 1; the last entry is defined by
tl1egpNumberTrustedNbrs'.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1egpNbrEntry { tl1egpNbrTable 1 }
Syntax:
tl1egpNbrEntry ::= SEQUENCE {
tl1egpNbr
IpAddress
}
Access:
read-write.
Status:
mandatory.
28
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1egpNbr { tl1egpNbrEntry 1 }
Syntax:
IpAddress
Definition:
This is the IP address of its EGP neighbor. This variable is
instantiated by its index (1-based) in the list of EGP neighbors.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1egpAutoSysNumber { tl1egp 5 }
Syntax:
INTEGER (0..65535)
Definition:
This is the autonomous system number.
Access:
read-write.
Status:
mandatory.
Default:
10
29
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1egpMinHelloInterval { tl1egp 6 }
Syntax:
INTEGER (15..65535)
Definition:
This is the EGP gateway minimum hello interval in seconds.
Access:
read-write.
Status:
mandatory.
Default:
30
OBJECT:
tl1egpMinPollInterval { tl1egp 7 }
Syntax:
INTEGER (30..65535)
Definition:
This is the EGP gateway minimum poll interval in seconds.
Access:
read-write.
Status:
mandatory.
Default:
60
30
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1egpRequestCeaseInterval { tl1egp 8 }
Syntax:
INTEGER (15..65535)
Definition:
This the EGP gateway request/cease transmit interval in seconds.
Access:
read-write.
Status:
mandatory.
Default:
30
OBJECT:
tl1egpDeclareDownInterval { tl1egp 9 }
Syntax:
INTEGER (1800..65535)
Definition:
This is the EGP gateway interval in seconds before declaring the
neighbor down.
Access:
read-write.
Status:
mandatory.
Default:
3600
31
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1egpAcquireCeaseInterval { tl1egp 10 }
Syntax:
INTEGER (30..240)
Definition:
This is the EGP gateway acquire/cease actions interval in
seconds.
Access:
read-write.
Status:
mandatory.
Default:
60
OBJECT:
tl1egpEnoughInterval { tl1egp 11 }
Syntax:
INTEGER (60..65535)
Definition:
This is the EGP gateway interval in seconds that provides an
elapsed time prior to checking that enough neighbors have been
acquired.
Access:
read-write.
Status:
mandatory.
Default:
120
32
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1egpPurgeInterval { tl1egp 12 }
Syntax:
INTEGER (0..600)
Definition:
This is the EGP gateway interval in seconds between purging old
routes.
Access:
read-write.
Status:
mandatory.
Default:
240
OBJECT:
tl1egpMode { tl1egp 13 }
Syntax:
INTEGER {
active-and-passive(0),
active(1),
passive(2)
}
Definition:
This is the EGP gateway mode of operation.
Access:
read-write.
Status:
mandatory.
Default:
active(1)
33
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1egpErrorTreatment { tl1egp 14 }
Syntax:
INTEGER (0..255)
Definition:
This is the EGP error treatment flag. When EGP detects an error
from an EGP neighbor, it right shifts the error treatment flag
by the value of the error code. If the result has the least
significant bit set, a CEASE command is sent to the EGP neighbor
and timers are reset. A value of 255 ensures that all errors
detected from a neighbor will cause a CEASE command to be sent.
Access:
read-write.
Status:
mandatory.
Default:
0
OBJECT:
tl1egpSharedNetwork { tl1egp 15 }
Syntax:
IpAddress
Definition:
This is the EGP gateway network address that is shared by all its
EGP neighbors.
Access:
read-write.
Status:
mandatory.
34
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
2.7. TL1 SNMP Group
OBJECT:
tl1snmpVersion { tl1snmp 1 }
Syntax:
INTEGER
Definition:
This is the SNMP version number.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1snmpTrapTable { tl1snmp 2 }
Syntax:
SEQUENCE OF tl1snmpTrapEntry
Definition:
This is a table of IP addresses of those Network Management
Stations that trap messages will be sent to.
Access:
read-write.
Status:
mandatory
35
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1snmpTrapEntry { tl1snmpTrapTable 1 }
Syntax:
tl1snmpTrapEntry ::= SEQUENCE {
tl1snmpTrapAddress
IpAddress
}
Access:
read-write.
Status:
mandatory
OBJECT:
tl1snmpTrapAddress { tl1snmpTrapEntry 1 }
Syntax:
IpAddress
Definition:
This is the IP address of the device that trap messages will be
sent to.
Access:
read-write.
Status:
mandatory.
36
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1snmpForwardTraps { tl1snmp 3 }
Syntax:
INTEGER {
(2)YES,
(1)NO
}
Definition:
This flag tells SNMP to send SNMP Trap messages.
Access:
read-write.
Status:
mandatory.
Default:
YES(2)
OBJECT:
tl1snmpLastTrapMessage { tl1snmp 4 }
Syntax:
OCTET STRING (SIZE (0..128))
Definition:
This is the displayable string sent with the last trap message.
Access:
read-only.
Status:
mandatory.
37
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1snmpNMSTable { tl1snmp 5 }
Syntax:
SEQUENCE OF tl1snmpNMSEntry
Definition:
This is a table of IP addresses of those Network Management
Stations that the device will respond to. If no address is
specified, then the requesting device's IP address is not
checked. Each variable is instantiated by a number from
(1..maximum number of Network Management Stations).
Access:
read-write.
Status:
mandatory
OBJECT:
tl1snmpNMSEntry { tl1snmpNMSTable 1 }
Syntax:
tl1snmpNMSEntry ::= SEQUENCE {
tl1snmpNMSAddress
IpAddress
}
Access:
read-write.
Status:
mandatory
38
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1snmpNMSAddress { tl1snmpNMSEntry 1 }
Syntax:
IpAddress
Definition:
This is the IP address used to validate an incoming SNMP request.
If the source address in the request matches this address, then
the device will respond to the Network Management Station. If no
address is specified, no checking is performed.
Access:
read-write.
Status:
mandatory.
2.8. TL1 BRE Group
OBJECT:
tl1breConfigParams { tl1bre 1 }
Syntax:
OBJECT IDENTIFIER
Definition:
The group of Bridge Relay Encapsulation (BRE) configuration
parameters.
Access:
read-write.
Status:
mandatory.
39
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breBridgeNumber { tl1breConfigParams 1 }
Syntax:
INTEGER (0..255)
Definition:
The identifier for this bridge, used by BRE. This value should
be unique across all Virtual LANs within a given bridged network.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1breBridgeIpAddress { tl1breConfigParams 2 }
Syntax:
IpAddress
Definition:
The Internet address of this bridge that is to be used for
bridging across Virtual LANs. BRE will put this address in the
BRE header of any outbound frames. Peer BREs should use this
address for routing frames to this bridge.
Access:
read-write.
Status:
mandatory.
40
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breForwardTableAgeingTime { tl1breConfigParams 3 }
Syntax:
INTEGER
Definition:
The time for ageing out entries in the BRE Forwarding Table.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1breNumConfigBrdgLstEntries { tl1breConfigParams 4 }
Syntax:
INTEGER (0..32)
Definition:
The number of entries in the Configured Bridge List. This value
should be updated any time the Configured Bridge List is
modified.
Access:
read-write.
Status:
mandatory.
41
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breConfigBridgeListTable { tl1bre 2 }
Syntax:
SEQUENCE OF tl1breCBridgeListEntry
Definition:
The configured list of known bridges in the attached Virtual
LAN(s).
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1breCBridgeListEntry { tl1breConfigBridgeListTable 1 }
Syntax:
tl1breCBridgeListEntry ::= SEQUENCE {
tl1breCblBridgeNumber
INTEGER,
tl1breCblVLanId
INTEGER,
tl1breCblSrBridgeNumber
INTEGER,
tl1breCblIpAddress
IpAddress
}
Definition:
A Configured Bridge List entry identifying a particular bridge in
a particular Virtual LAN. There may be multiple Configured
Bridge List entries for a given bridge, if that bridge is known
by multiple Source Routing Bridge Numbers. When multiple
entries exist for a bridge, the unique BRE Bridge Number is used
to correlate them. Each variable is instantiated by an index
(1..maximum number of bridges).
Access:
read-write.
Status:
mandatory.
42
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breCblBridgeNumber { tl1breCBridgeListEntry 1 }
Syntax:
INTEGER (0..255)
Definition:
The BRE Bridge Number for the bridge described by this Configured
Bridge List entry.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1breCblVLanId { tl1breCBridgeListEntry 2 }
Syntax:
INTEGER (0..4095)
Definition:
The identifier of the Virtual LAN in which the bridge described
by this Configured Bridge List entry resides.
Access:
read-write.
Status:
mandatory.
43
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breCblSrBridgeNumber { tl1breCBridgeListEntry 3 }
Syntax:
INTEGER (0..15)
Definition:
The Source Routing Bridge Number for the bridge described by this
Configured Bridge List entry.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1breCblIpAddress { tl1breCBridgeListEntry 4 }
Syntax:
IpAddress
Definition:
The Internet address for the bridge described by this Configured
Bridge List entry.
Access:
read-write.
Status:
mandatory.
44
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breBridgeListTable { tl1bre 3 }
Syntax:
SEQUENCE OF tl1breBridgeListEntry
Definition:
The current list of known bridges in the attached Virtual LAN(s).
This list is composed of the configured bridge list plus any
other bridges that BRE has learned about.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1breBridgeListEntry { tl1breBridgeListTable 1 }
Syntax:
tl1breBridgeListEntry ::= SEQUENCE {
tl1breBlBridgeNumber
INTEGER,
tl1breBlVLanId
INTEGER,
tl1breBlSrBridgeNumber
INTEGER,
tl1breBlIpAddress
IpAddress
}
Definition:
A Bridge List entry identifying a particular bridge in a
particular Virtual LAN. There may be multiple Bridge List
entries for a given bridge, if that bridge is known by multiple
Source Routing Bridge Numbers. When multiple entries exist for a
bridge, the unique BRE Bridge Number is used to correlate them.
Each variable is instantiated by an index (1..maximum number of
bridges).
Access:
read-only.
Status:
mandatory.
45
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breBlBridgeNumber { tl1breBridgeListEntry 1 }
Syntax:
INTEGER (0..255)
Definition:
The BRE Bridge Number for the bridge described by this Bridge
List entry.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1breBlVLanId { tl1breBridgeListEntry 2 }
Syntax:
INTEGER (0..4095)
Definition:
The identifier of the Virtual LAN in which the bridge described
by this Bridge List entry resides.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1breBlSrBridgeNumber { tl1breBridgeListEntry 3 }
Syntax:
INTEGER (0..15)
Definition:
The Source Routing Bridge Number for the bridge described by this
Bridge List entry.
Access:
read-only.
Status:
mandatory.
46
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breBlIpAddress { tl1breBridgeListEntry 4 }
Syntax:
IpAddress
Definition:
The Internet address for the bridge described by this Bridge List
entry.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1breForwardTable { tl1bre 4 }
Syntax:
SEQUENCE of tl1breForwardTableEntry
Definition:
The learned list of BRE Forwarding Table entries used to route
frames across the Virtual LAN(s). Each entry identifies a known
end station, and the bridge to which a frame destined for that
end station should be routed.
Access:
read-only.
Status:
mandatory.
47
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breForwardTableEntry { tl1breForwardTable 1 }
Syntax:
tl1breForwardTableEntry ::= SEQUENCE {
tl1breFtMacAddress
OCTET STRING,
tl1breFtIpAddress
IpAddress
}
Definition:
A BRE Forwarding Table entry identifying a particular end station
and the bridge to which a frame destined for that end station is
to be routed. Each variable is instantiated by an index
(1..maximum number of forwarding table entries).
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1breFtMacAddress { tl1breForwardTableEntry 1}
Syntax:
OCTET STRING (SIZE 6)
Definition:
The MAC Address identifying a particular end station accessible
across a Virtual LAN.
Access:
read-only.
Status:
mandatory.
48
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breFtIpAddress { tl1breForwardTableEntry 2}
Syntax:
IpAddress
Definition:
The Internet address of a bridge in a Virtual LAN where frames
destined for the entry's end station are to be routed.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1breStatTable { tl1bre 5 }
Syntax:
SEQUENCE OF tl1breStatEntry
Definition:
This is the set of statistics that BRE maintains for each of its
Virtual LAN interfaces. Each entry is instantiated by logical
interface number (1..ifNumber). The statistics for a given
Virtual LAN are found in the entry corresponding to the lowest
numbered logical interface associated with the Virtual LAN.
Access:
read-only.
Status:
mandatory.
49
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breStatEntry { tl1breStatTable 1 }
Syntax:
tl1breStatEntry ::= SEQUENCE {
tl1breInTSFs
Counter,
tl1breInSRFs
Counter,
tl1breInEFs
Counter,
tl1breInBPDUs
Counter,
tl1breInErrors
Counter,
tl1breOutTSFs
Counter,
tl1breOutSRFs
Counter,
tl1breOutEFs
Counter,
tl1breOutBPDUs
Counter
}
Definition:
A entry containing statistics for a particular Virtual LAN.
Access:
read-only.
Status:
mandatory.
50
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breInTSFs { tl1breStatEntry 1 }
Syntax:
Counter
Definition:
The number of Transparent Spanning Frames (TSFs) received from a
peer BRE in the Virtual LAN.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1breInSRFs { tl1breStatEntry 2 }
Syntax:
Counter
Definition:
The number of Specifically Routed Frames (SRFs) received from
peer BRE in the Virtual LAN.
Access:
read-only.
Status:
mandatory.
51
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breInEFs { tl1breStatEntry 3 }
Syntax:
Counter
Definition:
The number of explorer frames received from a peer BRE in the
Virtual LAN. Both Spanning Tree Explorer (STE) and All Routes
Explorer (ARE) frames are counted.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1breInBPDUs { tl1breStatEntry 4 }
Syntax:
Counter
Definition:
The number of Bridge Protocol Data Units (BPDUs) received from a
peer BRE in the Virtual LAN.
Access:
read-only.
Status:
mandatory.
52
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breInErrors { tl1breStatEntry 5}
Syntax:
Counter
Definition:
The number of received BRE transmissions discarded because the
BRE header information was in error.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1breOutTSFs { tl1breStatEntry 6 }
Syntax:
Counter
Definition:
The number of Transparent Spanning Frames (TSFs) that BRE has
sent to the Virtual LAN.
Access:
read-only.
Status:
mandatory.
53
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breOutSRFs { tl1breStatEntry 7 }
Syntax:
Counter
Definition:
The number of Specifically Routed Frames (SRFs) that BRE has sent
to the Virtual LAN.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1breOutEFs { tl1breStatEntry 8 }
Syntax:
Counter
Definition:
The number of explorer frames that BRE has sent to the Virtual
LAN. Both Spanning Tree Explorer (STE) and All Routes Explorer
(ARE) frames are counted.
Access:
read-only.
Status:
mandatory.
54
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1breOutBPDUs { tl1breStatEntry 9 }
Syntax:
Counter
Definition:
The number of Bridge Protocol Data Units (BPDUs) that BRE has
sent to the Virtual LAN.
Access:
read-only.
Status:
mandatory.
2.9. TL1 RIP Group
OBJECT:
tl1ripInPkts { tl1rip 1 }
Syntax:
Counter
Definition:
The number of packets received.
Access:
read-only.
Status:
mandatory.
55
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ripOutPkts { tl1rip 2 }
Syntax:
Counter
Definition:
The number of packets transmitted.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ripBadSize { tl1rip 3 }
Syntax:
Counter
Definition:
The number of packets received with an incorrect size.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ripBadVersion { tl1rip 4 }
Syntax:
Counter
Definition:
The number of packets received with a version number of 0.
Access:
read-only.
Status:
mandatory.
56
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ripNonZero { tl1rip 5 }
Syntax:
Counter
Definition:
The number of packets received with a 'must be zero' or 'zero'
field non-zero.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ripBadFamily { tl1rip 6 }
Syntax:
Counter
Definition:
The number of packets received whose family was not DoD Internet.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ripBadPort { tl1rip 7 }
Syntax:
Counter
Definition:
The number of Response packets received whose source port was not
equal to 520.
Access:
read-only.
Status:
mandatory.
57
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ripBadMetric { tl1rip 8 }
Syntax:
Counter
Definition:
The number of packets received with a route entry having a metric
greater than 16.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ripBadAddr { tl1rip 9 }
Syntax:
Counter
Definition:
The number of packets received whose source address is bad (class
D, class E, network address 0, or loopback).
Access:
read-only.
Status:
mandatory.
58
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ripBadCommand { tl1rip 10 }
Syntax:
Counter
Definition:
The number of packets received whose command was neither Request
nor Response.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ripBadClass { tl1rip 11 }
Syntax:
Counter
Definition:
The number of routing entries in packets received that advertised
a class D or class E address.
Access:
read-only.
Status:
mandatory.
59
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ripBadNbr { tl1rip 12 }
Syntax:
Counter
Definition:
The number of packets received whose source address was not
consistent with the network address of the interface that
received the packet.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ripOwnAddr { tl1rip 13 }
Syntax:
Counter
Definition:
The number of packets received with our own source address.
Access:
read-only.
Status:
mandatory.
60
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ripConfigTable { tl1rip 14 }
Syntax:
SEQUENCE OF tl1ripConfigEntry
Definition:
This is a table of parameters designed to configured the RIP
protocol on a per interface basis. Each parameter is instantiated
by logical interface number (1..ifNumber).
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ripConfigEntry { tl1ripConfigTable 1 }
Syntax:
tl1ripConfigEntry ::= SEQUENCE {
tl1ripMode
INTEGER,
tl1ripSimple
INTEGER,
tl1ripAdverStatic
INTEGER,
tl1ripAdverIntf
INTEGER,
tl1ripHolddown
INTEGER
}
Access:
read-write.
Status:
mandatory.
61
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ripMode { tl1ripConfigEntry 1 }
Syntax:
INTEGER {
disabled(1),
silent(2),
enabled(3),
deaf(4)
}
Definition:
This is the RIP operating mode on the designated interface.
Silent means that RIP receives, but does not transmit Update
messages; deaf means that RIP transmits, but does not receive
Update messages.
Access:
read-write.
Status:
mandatory.
Default:
fully-operational(3)
OBJECT:
tl1ripSimple { tl1ripConfigEntry 2 }
Syntax:
INTEGER {
simple-split-horizon(2),
poisoned-reverse(1)
}
Definition:
This flag enables 'simple split horizon' on the designated
interface; otherwise, 'poisoned reversed' is enabled.
Access:
read-write.
Status:
mandatory.
Default:
simple-split-horizon(2)
62
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ripAdverStatic { tl1ripConfigEntry 3 }
Syntax:
INTEGER {
advertise(2),
don't-advertise(1)
}
Definition:
This flag enables the advertisement of static and default routes
on the designated interface.
Access:
read-write.
Status:
mandatory.
Default:
advertise(2)
OBJECT:
tl1ripAdverIntf { tl1ripConfigEntry 4 }
Syntax:
INTEGER {
advertise(2),
don't-advertise(1)
}
Definition:
This flag enables the advertisement of the designated interface's
network address.
Access:
read-write.
Status:
mandatory.
Default:
advertise(2)
63
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ripHolddown { tl1ripConfigEntry 5 }
Syntax:
INTEGER
Definition:
This is the holddown interval for the designated interface.
Access:
read-write.
Status:
mandatory.
Default:
60
2.10. TL1 X25 Group
OBJECT:
tl1x25IfTable { tl1x25 1 }
Syntax:
SEQUENCE OF tl1x25IfEntry
Definition:
This is the X25 interface table. Each variable is instantiated by
logical interface number (1..ifNumber).
Access:
read-write.
Status:
mandatory.
64
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25IfEntry { tl1x25IfTable 1 }
Syntax:
tl1x25IfEntry ::= SEQUENCE {
tl1x25InPkts
Counter,
tl1x25OutPkts
Counter,
tl1x25GFI
Counter,
tl1x25PktInv
Counter,
tl1x25PinvR1
Counter,
tl1x25PinvR2
Counter,
tl1x25PinvR3
Counter,
tl1x25PinvP1
Counter,
tl1x25PinvP2
Counter,
tl1x25PinvP3
Counter,
tl1x25PinvP4
Counter,
tl1x25PinvP5
Counter,
tl1x25PinvP6
Counter,
tl1x25PinvP7
Counter,
tl1x25PinvD1
Counter,
tl1x25PinvD2
Counter,
tl1x25PinvD3
Counter,
tl1x25PktLong
Counter,
tl1x25PktShort
Counter,
tl1x25CallingAddr
Counter,
tl1x25CalledAddr
Counter,
tl1x25CallBad
Counter,
tl1x25FacParam
Counter,
tl1x25FacCode
Counter,
65
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
tl1x25BadPkt
Counter,
tl1x25RejInv
Counter,
tl1x25LcRestr
Counter,
tl1x25IntrCPkt
Counter,
tl1x25CallTimer
Counter,
tl1x25ResetTimer
Counter,
tl1x25Service
INTEGER,
tl1x25Window
INTEGER,
tl1x25PktSize
INTEGER
}
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1x25InPkts { tl1x25IfEntry 1 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface.
Access:
read-only.
Status:
mandatory.
66
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25OutPkts { tl1x25IfEntry 2 }
Syntax:
Counter
Definition:
The number of X25 packets sent on the designated interface.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25GFI { tl1x25IfEntry 3 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid General Format Identifier.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25PktInv { tl1x25IfEntry 4 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid packet type.
Access:
read-only.
Status:
mandatory.
67
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25PinvR1 { tl1x25IfEntry 5 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid packet type for state r1 - Packet Level
Ready.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25PinvR2 { tl1x25IfEntry 6 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid packet type for state r2 - DTE Restart
Request.
Access:
read-only.
Status:
mandatory.
68
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25PinvR3 { tl1x25IfEntry 7 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid packet type for state r3 - DCE Restart
Indication.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25PinvP1 { tl1x25IfEntry 8 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid packet type for state p1 - Ready.
Access:
read-only.
Status:
mandatory.
69
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25PinvP2 { tl1x25IfEntry 9 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid packet type for state p2 - DTE Waiting.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25PinvP3 { tl1x25IfEntry 10 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid packet type for state p3 - DCE Waiting.
Access:
read-only.
Status:
mandatory.
70
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25PinvP4 { tl1x25IfEntry 11 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid packet type for state p4 - Data Transfer.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25PinvP5 { tl1x25IfEntry 12 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid packet type for state p5 - Call Collision.
Access:
read-only.
Status:
mandatory.
71
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25PinvP6 { tl1x25IfEntry 13 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid packet type for state p6 - DTE Clear Request.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25PinvP7 { tl1x25IfEntry 14 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid packet type for state p7 - DCE Clear
Indication.
Access:
read-only.
Status:
mandatory.
72
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25PinvD1 { tl1x25IfEntry 15 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid packet type for state d1 - Flow Control
Ready.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25PinvD2 { tl1x25IfEntry 16 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid packet type for state d2 - DTE Reset Request.
Access:
read-only.
Status:
mandatory.
73
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25PinvD3 { tl1x25IfEntry 17 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid packet type for state d3 - DCE Reset
indication.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25PktLong { tl1x25IfEntry 18 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that were larger than the maximum packet size.
Access:
read-only.
Status:
mandatory.
74
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25PktShort { tl1x25IfEntry 19 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that were smaller than the minimum packet size.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25CallingAddr { tl1x25IfEntry 20 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid calling address.
Access:
read-only.
Status:
mandatory.
75
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25CalledAddr { tl1x25IfEntry 21 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had an invalid called address.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25CallBad { tl1x25IfEntry 22 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had a call set-up problem.
Access:
read-only.
Status:
mandatory.
76
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25FacParam { tl1x25IfEntry 23 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had a facility parameter not allowed.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25FacCode { tl1x25IfEntry 24 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had a facility code not allowed.
Access:
read-only.
Status:
mandatory.
77
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25BadPkt { tl1x25IfEntry 25 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that were not identifiable.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25RejInv { tl1x25IfEntry 26 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that contained a Reject not subscribed to.
Access:
read-only.
Status:
mandatory.
78
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25LcRestr { tl1x25IfEntry 27 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that had a Restart with non-zero logical channel number.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25IntrCPkt { tl1x25IfEntry 28 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
that contained an Interrupt Confirmation.
Access:
read-only.
Status:
mandatory.
79
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25CallTimer { tl1x25IfEntry 29 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
whose call timer for a Call Request had expired.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1x25ResetTimer { tl1x25IfEntry 30 }
Syntax:
Counter
Definition:
The number of X25 packets received on the designated interface
whose reset timer for a Reset Request had expired.
Access:
read-only.
Status:
mandatory.
80
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25Service { tl1x25IfEntry 31 }
Syntax:
INTEGER (
Basic-service(1),
Standard-service(2)
)
Definition:
This is the X.25 Standard/Basic service flag.
Access:
read-write.
Status:
mandatory.
Default:
1
OBJECT:
tl1x25Window { tl1x25IfEntry 32 }
Syntax:
INTEGER (2..7)
Definition:
This is the maximum X.25 window size.
Access:
read-write.
Status:
mandatory.
Default:
7
81
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1x25PktSize { tl1x25IfEntry 33 }
Syntax:
INTEGER (7..11)
Definition:
This is the maximum X.25 packet size (bytes) as a power of 2.
Access:
read-write.
Status:
mandatory.
Default:
11
2.11. TL1 FDDI Group
OBJECT:
tl1fddiMACStatTable { tl1fddi 1 }
Syntax:
SEQUENCE OF tl1fddiMACStatEntry
Definition:
This is a list of the FDDI MAC statistics. Each entry is
instantiated by a pair of indices; first, by the logical
interface number (1..ifNumber); second, by the MAC number.
Access:
read-only.
Status:
mandatory.
82
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACStatEntry { tl1fddiMACStatTable 1 }
Syntax:
tl1fddiMACStatEntry ::= SEQUENCE {
tl1fddiMACRcvAbort
Counter,
tl1fddiMACRcvOverflow
Counter,
tl1fddiMACRcvUnderflow
Counter,
tl1fddiMACRbcCollision
Counter,
tl1fddiMACTxSyncChain
Counter,
tl1fddiMACTxAsyncChain
Counter,
tl1fddiMACTxSyncFrm
Counter,
tl1fddiMACTxAsyncFrm
Counter,
tl1fddiMACTxSyncDone
Counter,
tl1fddiMACTxAsyncDone
Counter,
tl1fddiMACTxBufEmpty
Counter,
tl1fddiMACTxAbort
Counter,
tl1fddiMACRxFrmsRcvd
Counter,
tl1fddiMACRxSmallGap
Counter,
tl1fddiMACDpcCollision
Counter,
tl1fddiMACBadSyncPtr
Counter,
tl1fddiMACBadAsyncPtr
Counter,
tl1fddiMACOtherBecRcvd
Counter,
tl1fddiMACOwnBecRcvd
Counter,
tl1fddiMACHighClmRcvd
Counter,
tl1fddiMACLowClmRcvd
Counter,
tl1fddiMACWonClaimBid
Counter,
tl1fddiMACPktsDetected
Counter,
tl1fddiMACTokenCt
Counter,
83
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
tl1fddiMACLateCt
Counter,
tl1fddiMACTvxExpiredCt
Counter,
tl1fddiMACEnterBeaconCt
Counter,
tl1fddiMACEnterClaimCt
Counter,
tl1fddiMACMultiTokens
Counter,
tl1fddiMACNotCopiedCt
Counter,
tl1fddiMACDuplicateAddr
Counter,
tl1fddiMACRingOpCt
Counter,
tl1fddiMACFrameCt
Counter,
tl1fddiMACLostCt
Counter,
tl1fddiMACErrorCt
Counter,
tl1fddiMACOutOfBuf
Counter,
tl1fddiMACReceiveCt
Counter,
tl1fddiMACTransmitCt
Counter,
tl1fddiMACInternalErrorCt
Counter,
tl1fddiMACTneg
INTEGER
}
Access:
read-only.
Status:
mandatory.
84
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACRcvAbort { tl1fddiMACStatEntry 1 }
Syntax:
Counter
Definition:
The number of frames received that were aborted by the chip set.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACRcvOverflow { tl1fddiMACStatEntry 2 }
Syntax:
Counter
Definition:
The number of times the FDDI receive fifo was filled.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACRcvUnderflow { tl1fddiMACStatEntry 3 }
Syntax:
Counter
Definition:
The number of underflow errors that occurred in the FDDI receive
fifo.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACRbcCollision { tl1fddiMACStatEntry 4 }
Syntax:
Counter
85
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
Definition:
The number of times that the RBC chip and the NP both accessed
memory at the same time.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACTxSyncChain { tl1fddiMACStatEntry 5 }
Syntax:
Counter
Definition:
The number of times the "synchronous data chain transmitted" bit
was set in the interrupt status register.
Access:
read-only.
Status:
mandatory.
86
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACTxAsyncChain { tl1fddiMACStatEntry 6 }
Syntax:
Counter
Definition:
The number of times the "asynchronous data chain transmitted" bit
was set in the interrupt status register.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACTxSyncFrm { tl1fddiMACStatEntry 7 }
Syntax:
Counter
Definition:
The number of times the "synchronous Frames Transmitted" bit was
set in the interrupt status register.
Access:
read-only.
Status:
mandatory.
87
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACTxAsyncFrm { tl1fddiMACStatEntry 8 }
Syntax:
Counter
Definition:
The number of times the "asynchronous Frames Transmitted" bit
was set in the interrupt status register.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACTxSyncDone { tl1fddiMACStatEntry 9 }
Syntax:
Counter
Definition:
The number of times the "synchronous frames transmitted with the
XDONE bit set" bit was set in the interrupt status register.
Access:
read-only.
Status:
mandatory.
88
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACTxAsyncDone { tl1fddiMACStatEntry 10 }
Syntax:
Counter
Definition:
The number of times the "asynchronous frames transmitted with the
XDONE bit set" bit was set in the interrupt status register.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACTxBufEmpty { tl1fddiMACStatEntry 11 }
Syntax:
Counter
Definition:
The number of times the "all frames in the transmit fifo have
been transmitted" bit was set in the interrupt status register.
Access:
read-only.
Status:
mandatory.
89
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACTxAbort { tl1fddiMACStatEntry 12 }
Syntax:
Counter
Definition:
The number of times the "transmit frame abort" bit was set in the
interrupt register.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACRxFrmsRcvd { tl1fddiMACStatEntry 13 }
Syntax:
Counter
Definition:
The number of times the "received frame" bit was set in the
interrupt status register.
Access:
read-only.
Status:
mandatory.
90
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACRxSmallGap { tl1fddiMACStatEntry 14 }
Syntax:
Counter
Definition:
The number of times the "Inter-frame-gap too small" bit was set
in the interrupt status register.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACDpcCollision { tl1fddiMACStatEntry 15 }
Syntax:
Counter
Definition:
The number of times the "DPC\NP collision bit was set in the
interrupt status register.
Access:
read-only.
Status:
mandatory.
91
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACBadSyncPtr { tl1fddiMACStatEntry 16 }
Syntax:
Counter
Definition:
The number of times the "Invalid synchronous pointer or
descriptor" bit was set in the interrupt status register.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACBadAsyncPtr { tl1fddiMACStatEntry 17 }
Syntax:
Counter
Definition:
The number of times the "Invalid asynchronous pointer or
descriptor" bit was set in the interrupt status register.
Access:
read-only.
Status:
mandatory.
92
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACOtherBecRcvd { tl1fddiMACStatEntry 18 }
Syntax:
Counter
Definition:
The number of times the "Received Beacon other than own" bit was
set in the interrupt status register.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACOwnBecRcvd { tl1fddiMACStatEntry 19 }
Syntax:
Counter
Definition:
The number of times the "Received my own beacon frame" bit was
set in the interrupt status register.
Access:
read-only.
Status:
mandatory.
93
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACHighClmRcvd { tl1fddiMACStatEntry 20 }
Syntax:
Counter
Definition:
The number of times the "Higher Claim Received" bit was set in
the interrupt status register.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACLowClmRcvd { tl1fddiMACStatEntry 21 }
Syntax:
Counter
Definition:
The number of times the "Lower claim received" bit was set in the
interrupt status register.
Access:
read-only.
Status:
mandatory.
94
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACWonClaimBid { tl1fddiMACStatEntry 22 }
Syntax:
Counter
Definition:
The number of times the "Station won Claim Bid" bit was set in
the interrupt status register.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACPktsDetected { tl1fddiMACStatEntry 23 }
Syntax:
Counter
Definition:
The number of times the "Packets detected for this station" bit
was set in the interrupt status register.
Access:
read-only.
Status:
mandatory.
95
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACTokenCt { tl1fddiMACStatEntry 24 }
Syntax:
Counter
Definition:
The number of times the "Station issued token" bit was set in the
interrupt status register.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACLateCt { tl1fddiMACStatEntry 25 }
Syntax:
Counter
Definition:
The number of times the "Late count" bit was set in the interrupt
status register. This means the TRT had expired.
Access:
read-only.
Status:
mandatory.
96
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACTvxExpiredCt { tl1fddiMACStatEntry 26 }
Syntax:
Counter
Definition:
The number of times the "TVX expired count" bit was set in the
interrupt status register.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACEnterBeaconCt { tl1fddiMACStatEntry 27 }
Syntax:
Counter
Definition:
The number of times the "Entered Beacon State" bit was set in the
interrupt status register.
Access:
read-only.
Status:
mandatory.
97
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACEnterClaimCt { tl1fddiMACStatEntry 28 }
Syntax:
Counter
Definition:
The number of times the "Entered Claim State" bit was set in the
interrupt status register.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACMultiTokens { tl1fddiMACStatEntry 29 }
Syntax:
Counter
Definition:
The number of times the "Multiple Tokens detected" bit was set in
the interrupt status register.
Access:
read-only.
Status:
mandatory.
98
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACNotCopiedCt { tl1fddiMACStatEntry 30 }
Syntax:
Counter
Definition:
The number of times the "Packet not copied, buffer full" bit was
set in the interrupt status register.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACDuplicateAddr { tl1fddiMACStatEntry 31 }
Syntax:
Counter
Definition:
The number of times the "Duplicate address detected" bit was set
in the interrupt status register.
Access:
read-only.
Status:
mandatory.
99
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACRingOpCt { tl1fddiMACStatEntry 32 }
Syntax:
Counter
Definition:
The number of times the "Ring transitioned from non-op to op" bit
was set in the interrupt status register.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACFrameCt { tl1fddiMACStatEntry 33 }
Syntax:
Counter
Definition:
A hardware counter of the number of Complete Frame scanned by the
FORMAC chip.
Access:
read-only.
Status:
mandatory.
100
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACLostCt { tl1fddiMACStatEntry 34 }
Syntax:
Counter
Definition:
A hardware counter of the number of frames scanned and stripped
due to an invalid symbol in the frame.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACErrorCt { tl1fddiMACStatEntry 35 }
Syntax:
Counter
Definition:
A hardware counter of the number of frames detected with CRC or
length errors.
Access:
read-only.
Status:
mandatory.
101
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACOutOfBuf { tl1fddiMACStatEntry 36 }
Syntax:
Counter
Definition:
The number of times a packet was discarded due to the
unavailability of OS buffers.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACReceiveCt { tl1fddiMACStatEntry 37 }
Syntax:
Counter
Definition:
The number of frames received.
Access:
read-only.
Status:
mandatory.
102
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACTransmitCt { tl1fddiMACStatEntry 38 }
Syntax:
Counter
Definition:
The number of frames transmitted.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiMACInternalErrorCt { tl1fddiMACStatEntry 39 }
Syntax:
Counter
Definition:
The number of Timeplex specific internal errors that occurred.
Access:
read-only.
Status:
mandatory.
103
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACTneg { tl1fddiMACStatEntry 40 }
Syntax:
INTEGER
Definition:
The negotiated TRT value in microseconds.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiSMTStnStateTable { tl1fddi 2 }
Syntax:
SEQUENCE OF tl1fddiSMTStnStateEntry
Definition:
This is a list of the FDDI SMT State variables. Each entry is
instantiated by logical interface number (1..ifNumber).
Access:
read-only.
Status:
mandatory.
104
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiSMTStnStateEntry { tl1fddiSMTStnStateTable 1 }
Syntax:
tl1fddiSMTStnStateEntry ::= SEQUENCE {
tl1fddiSMTStnType
INTEGER,
tl1fddiSMTVersionId
INTEGER,
tl1fddiSMTMACCount
INTEGER,
tl1fddiSMTAttachCount
INTEGER,
tl1fddiSMTMasterCount
INTEGER,
tl1fddiSMTDasScmState
INTEGER,
tl1fddiSMTStnId
OCTET STRING
}
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiSMTStnType { tl1fddiSMTStnStateEntry 1 }
Syntax:
INTEGER {
station(1),
concentrator(2)
}
Definition:
This flag serves to distinguish between a station and a
concentrator.
Access:
read-only.
Status:
mandatory.
105
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiSMTVersionId { tl1fddiSMTStnStateEntry 2 }
Syntax:
INTEGER
Definition:
This is the SMT protocol version identifier.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiSMTMACCount { tl1fddiSMTStnStateEntry 3 }
Syntax:
INTEGER
Definition:
This is the number of MACs physically present in the
configuration.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiSMTAttachCount { tl1fddiSMTStnStateEntry 4 }
Syntax:
INTEGER
Definition:
This is the number of PHY attachments to the FDDI dual ring.
Access:
read-only.
Status:
mandatory.
106
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiSMTMasterCount { tl1fddiSMTStnStateEntry 5 }
Syntax:
INTEGER
Definition:
This is the number of slave ports on a concentrator.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiSMTDasScmState { tl1fddiSMTStnStateEntry 6 }
Syntax:
INTEGER {
isolated(1),
wrap-a(2),
wrap-b(3),
thru(4),
cleave-a(6),
cleave-b(7)
}
Definition:
This is the status for a dual attachment station's (DAS)
connection to the network.
Access:
read-only.
Status:
mandatory.
107
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiSMTStnId { tl1fddiSMTStnStateEntry 7 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is a 6-byte value that uniquely identifies the FDDI station.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiPHYStateTable { tl1fddi 3 }
Syntax:
SEQUENCE OF tl1fddiPHYStateEntry
Definition:
This table contains each FDDI PHY's operational state. Each PHY
parameter is an aggregate. PHYs are assigned the indices 1-n,
where n = SpurCount + AttachCount. In a DAS, PHY A has index 1
and PHY B has index 2. Additional PHYs in a station
(concentrator) are numbered from 3 thru n according to token
flow. Each PHY parameter is instantiated by two indices; first,
the logical interface number (1..ifNumber); second, the PHY
index.
Access:
read-only.
Status:
mandatory.
108
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiPHYStateEntry { tl1fddiPHYStateTable 1 }
Syntax:
tl1fddiPHYStateEntry ::= SEQUENCE {
tl1fddiPHYType
INTEGER,
tl1fddiPHYConnectState
INTEGER,
tl1fddiPHYRemotePHYType
INTEGER,
tl1fddiPHYRemoteMACIndicated
INTEGER,
tl1fddiPHYResourceIndex
INTEGER,
tl1fddiPHYConnectedResId
INTEGER
}
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiPHYType { tl1fddiPHYStateEntry 1 }
Syntax:
INTEGER {
a(1),
b(2),
s(3),
m(4)
}
Definition:
This is the type of PHY.
Access:
read-only.
Status:
mandatory.
109
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiPHYConnectState { tl1fddiPHYStateEntry 2 }
Syntax:
INTEGER {
disabled(1),
connecting(2),
standby(3),
active(4)
}
Definition:
This is the state of this PHY.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiPHYRemotePHYType { tl1fddiPHYStateEntry 3 }
Syntax:
INTEGER {
a(1),
b(2),
s(3),
m(4),
unknown(5)
}
Definition:
This is the type of the remote PHY.
Access:
read-only.
Status:
mandatory.
110
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiPHYRemoteMACIndicated { tl1fddiPHYStateEntry 4 }
Syntax:
INTEGER
Definition:
This flag indicates that the neighbor station intends to place a
MAC in the output token path of this PHY.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiPHYResourceIndex { tl1fddiPHYStateEntry 5 }
Syntax:
INTEGER
Definition:
This is the index assigned to this PHY's resource and is used to
identify each PHY in SMT.
Access:
read-only.
Status:
mandatory.
111
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiPHYConnectedResId { tl1fddiPHYStateEntry 6 }
Syntax:
INTEGER
Definition:
This is the index of the MAC or PHY resource connected to this
PHY's output port.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiSMTOperationalTable { tl1fddi 4 }
Syntax:
SEQUENCE OF tl1fddiSMTOperationalEntry
Definition:
This is a list of the FDDI SMT operational parameters. Each entry
is instantiated by logical interface number (1..ifNumber).
Access:
read-write.
Status:
mandatory.
112
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiSMTOperationalEntry { tl1fddiSMTOperationalTable 1 }
Syntax:
tl1fddiSMTOperationalEntry ::= SEQUENCE {
tl1fddiSMTLinkErrorRateCutoff
INTEGER,
tl1fddiSMTLinkErrorRateAlarm
INTEGER,
tl1fddiSMTByPassSwitchPresent
INTEGER,
tl1fddiSMTAttachConfiguration
INTEGER
}
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1fddiSMTLinkErrorRateCutoff { tl1fddiSMTOperationalEntry 1
}
Syntax:
INTEGER (1..10)
Definition:
This is an absolute integer representation of the exponent of the
bit error rate allowed before terminating the interface.
Access:
read-write.
Status:
mandatory.
Default:
7
113
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiSMTLinkErrorRateAlarm
{ tl1fddiSMTOperationalEntry 2 }
Syntax:
INTEGER (1..10)
Definition:
This is an absolute integer representation of the exponent of the
bit error rate allowed before generating an alarm.
Access:
read-write.
Default:
8
Status:
mandatory.
OBJECT:
tl1fddiSMTByPassSwitchPresent
{ tl1fddiSMTOperationalEntry 3 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
This flag indicates the presence of a By Pass Switch.
Access:
read-write.
Default:
FALSE(0)
Status:
mandatory.
114
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiSMTAttachConfiguration
{ tl1fddiSMTOperationalEntry 4 }
Syntax:
INTEGER {
cleave-A(1),
cleave-B(2),
dualattach(3)
}
Definition:
This is an attachment mode identifier with dualattach specifying
standard DAS and cleave-A specifying SAS on port A, and cleave-B
specifying SAS on port B.
Access:
read-write.
Default:
3
Status:
mandatory.
OBJECT:
tl1fddiMACOperationalTable { tl1fddi 5 }
Syntax:
SEQUENCE OF tl1fddiMACOperationalEntry
Definition:
This is a list of the FDDI MAC operational parameters. Each entry
is instantiated by a pair of indices; first, the logical
interface number (1..ifNumber); second, the MAC index.
Access:
read-write.
Status:
mandatory.
115
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACOperationalEntry
{ tl1fddiMACOperationalTable 1 }
Syntax:
tl1fddiMACOperationalEntry ::= SEQUENCE {
tl1fddiMACTReq
INTEGER,
tl1fddiMACTMax
INTEGER,
tl1fddiMACTvxValue
INTEGER,
tl1fddiMACTMin
INTEGER,
tl1fddiMACRcvThrot
INTEGER
}
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1fddiMACTReq { tl1fddiMACOperationalEntry 1 }
Syntax:
INTEGER (tl1fddiMACTMin..tl1fddiMACTMax)
Definition:
This is the requested Target Token Rotation Time. The time units
are in microseconds.
Access:
read-write.
Status:
mandatory.
Default:
100000
116
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACTMax { tl1fddiMACOperationalEntry 2 }
Syntax:
INTEGER (tl1fddiMACTMin..335,540)
Definition:
This is the maximum Target Token Rotation Time to be supported
by this station. The time units are in microseconds.
Access:
read-write.
Status:
mandatory.
Default:
165000
OBJECT:
tl1fddiMACTvxValue { tl1fddiMACOperationalEntry 3 }
Syntax:
INTEGER (1..5000)
Definition:
This is the Valid-Transmission Timer value, the maximum time
allowed between reception of valid frames or tokens. The time
units are in microseconds.
Access:
read-write.
Status:
mandatory.
Default:
2500
117
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiMACTMin { tl1fddiMACOperationalEntry 4 }
Syntax:
INTEGER (4000..tl1fddiMACTMax)
Definition:
This is the minimum Target Token Rotation Time to be supported
by this station. The time units are in microseconds.
Access:
read-write.
Status:
mandatory.
Default:
4000
OBJECT:
tl1fddiMACRcvThrot { tl1fddiMACOperationalEntry 5 }
Syntax:
INTEGER
Definition:
The maximum number of data bytes that the specified FDDI
interface can receive per interrupt.
Access:
read-write.
Status:
mandatory.
118
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiPHYOperationalTable { tl1fddi 6 }
Syntax:
SEQUENCE OF tl1fddiPHYOperationalEntry
Definition:
This is a list of the FDDI PHY operational parameters. Each entry
is instantiated by a pair of indices; first, the logical
interface number (1..ifNumber); second, the PHY index.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1fddiPHYOperationalEntry { tl1fddiPHYOperationalTable 1 }
Syntax:
tl1fddiPHYOperationalEntry ::= SEQUENCE {
tl1fddiPHYAction
INTEGER
}
Access:
read-write.
Status:
mandatory.
119
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiPHYAction { tl1fddiPHYOperationalEntry 1 }
Syntax:
INTEGER {
enabled(0),
disabled(1)
}
Definition:
This value indicates an action that was taken (when read) or is
to be taken (when written) for the specified PHY.
Access:
read-write.
Status:
mandatory.
Default:
0
OBJECT:
tl1fddiSMTNeighborTable { tl1fddi 7 }
Syntax:
SEQUENCE OF tl1fddiSMTNeighborEntry
Definition:
This is a list of the upstream and downstream neighbors. Each
entry is instantiated by a pair of indices; first, the logical
interface number (1..ifNumber); second, the MAC index.
Access:
read-only.
Status:
mandatory.
120
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiSMTNeighborEntry { tl1fddiSMTNeighborTable 1 }
Syntax:
tl1fddiSMTNeighborEntry::= SEQUENCE {
tl1fddiSMTStnUpstreamNbr
OCTET STRING,
tl1fddiSMTStnDownstreamNbr
OCTET STRING
}
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1fddiSMTStnUpstreamNbr { tl1fddiSMTNeighborEntry 1 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is this station's upstream neighbor's individual MAC
address.
Access:
read-only.
Status:
mandatory.
121
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1fddiSMTStnDownstreamNbr { tl1fddiSMTNeighborEntry 2 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is the individual MAC address for this station's downstream
neighbor.
Access:
read-only.
Status:
mandatory.
2.12. TL1 STAP Group
OBJECT:
tl1stapBridgeConfig { tl1stap 1 }
Syntax:
OBJECT IDENTIFIER
Definition:
This is a group of configurable bridge parameters f o r t h e
Spanning Tree Algorithm protocol.
Access:
read-write.
Status:
mandatory.
122
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapSpanningTreeEnabled { tl1stapBridgeConfig 1 }
Syntax:
INTEGER {
Disabled (0),
Enabled (1)
}
Definition:
This flag indicates whether the Spanning Tree Algorithm/Protocol
is enabled.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1stapCMaxBridgeTransDelay { tl1stapBridgeConfig 3 }
Syntax:
INTEGER (1..4)
Definition:
This is the configurable maximum time elapsing between reception
and transmission by a bridge of a forwarded frame.
Access:
read-write.
Status:
mandatory.
123
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapCMaxBpduTransDelay { tl1stapBridgeConfig 4 }
Syntax:
INTEGER (1..4)
Definition:
This is the configurable maximum delay between finding the need
to send a Bridge Protocol Data Unit and the transmission of such
a packet.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1stapCBridgeHelloTime { tl1stapBridgeConfig 6 }
Syntax:
INTEGER (1..10)
Definition:
This is the configurable value of the Hello Time parameter when
the bridge is the root or attempting to become the Root.
Access:
read-write.
Status:
mandatory.
124
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapCBridgeMaxAge { tl1stapBridgeConfig 7 }
Syntax:
INTEGER (6..40)
Definition:
This is the configurable value of the Max Age parameter when the
bridge is the Root or is attempting to become the Root.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1stapCForwardDelay { tl1stapBridgeConfig 8 }
Syntax:
INTEGER (4..30)
Definition:
This is the configurable value of the Forward Delay parameter
when the bridge is the Root or is attempting to become the Root.
Access:
read-write.
Status:
mandatory.
125
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapCBridgePriority { tl1stapBridgeConfig 9 }
Syntax:
INTEGER (0..65535)
Definition:
This is the configurable Bridge Priority which is used in
calculating the Root Bridge.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1stapPortConfigTable { tl1stap 2 }
Syntax:
SEQUENCE of tl1stapPortConfigEntry
Definition:
This is the Configurable Port parameters for Spanning Tree
Algorithm protocol. Each parameter is instantiated by logical
interface (1..ifNumber).
Access:
read-write.
Status:
mandatory.
126
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapPortConfigEntry { tl1stapPortConfigTable 1 }
Syntax:
tl1stapPortConfigEntry ::= SEQUENCE {
tl1stapCPortState
INTEGER,
tl1stapCPortPriority
INTEGER,
tl1stapCPathCost
INTEGER
}
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1stapCPortState { tl1stapPortConfigEntry 1 }
Syntax:
INTEGER {
disable(0),
enabled(1)
}
Definition:
This is the configurable State which is used to remotely enable
or disable a port from being included or excluded respectively in
the Spanning Tree Algorithm.
Access:
read-write.
Status:
mandatory.
127
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapCPortPriority { tl1stapPortConfigEntry 2 }
Syntax:
INTEGER (0..255)
Definition:
This is the configurable Port Priority which is used in
calculating the Port Identifier.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1stapCPathCost { tl1stapPortConfigEntry 3 }
Syntax:
INTEGER (1..65535)
Definition:
This is the configurable Path Cost which is used as the
contribution of the path through this port, when the port is the
Root Port, to the total cost of the path to the Root for this
bridge.
Access:
read-write.
Status:
mandatory.
128
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapBridgeState { tl1stap 3 }
Syntax:
OBJECT IDENTIFIER
Definition:
This is a group consisting of current bridge information such as
Bridge Identifier, Protocol Parameters, Designated Root, Root
Port and Topology change indicators.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1stapBridgeIdentifier { tl1stapBridgeState 1 }
Syntax:
OCTET STRING (SIZE 8)
Definition:
The unique Bridge Identifier of the bridge. This parameter is
derived from the unique Bridge Address and the Bridge Priority.
Access:
read-only.
Status:
mandatory.
129
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapTimeSinceTopChange { tl1stapBridgeState 2 }
Syntax:
TimeTicks
Definition:
This is the elapsed time (in seconds) since the Topology Change
flag parameter for the bridge was last set to TRUE.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1stapTopologyChangeCount { tl1stapBridgeState 3 }
Syntax:
Counter
Definition:
The number of times the Topology Change flag for the bridge has
been set since the bridge was powered on or initialized.
Access:
read-only.
Status:
mandatory.
130
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapTopologyChange { tl1stapBridgeState 4 }
Syntax:
INTEGER (
TRUE(1),
FALSE(0)
)
Definition:
The value of the Topology Change flag in Configuration BPDUs to
be transmitted by the bridge on LANs for which the bridge is the
Designated Bridge.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1stapDesignatedRoot { tl1stapBridgeState 5 }
Syntax:
OCTET STRING (SIZE 8)
Definition:
The Unique Bridge Identifier of the bridge assumed to be the
Root.
Access:
read-only.
Status:
mandatory.
131
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapRootPathCost { tl1stapBridgeState 6 }
Syntax:
INTEGER
Definition:
The Cost of the path to the Root from this bridge.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1stapRootPort { tl1stapBridgeState 7 }
Syntax:
INTEGER
Definition:
The Port Identifier of the port which offers the lowest cost path
to the Root.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1stapMaxAge { tl1stapBridgeState 8 }
Syntax:
INTEGER (6..40)
Definition:
The maximum age of received protocol information before it is
discarded.
Access:
read-only.
Status:
mandatory.
132
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapHelloTime { tl1stapBridgeState 9 }
Syntax:
INTEGER (1..10)
Definition:
The time interval between the transmission of Configuration
BPDU's by a bridge which is attempting to become the Root or is
the Root.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1stapForwardDelay { tl1stapBridgeState 10 }
Syntax:
INTEGER (4..30)
Definition:
The time spent in the Listening State while moving from the
Blocking State to the Learning State.
Access:
read-only.
Status:
mandatory.
133
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapBridgeMaxAge { tl1stapBridgeState 11 }
Syntax:
INTEGER (6..40)
Definition:
The value of the Max Age parameter when the bridge is the Root or
is attempting to become the Root.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1stapBridgeHelloTime { tl1stapBridgeState 12 }
Syntax:
INTEGER (1..10)
Definition:
The value of the Hello Time parameter when the bridge is the Root
or attempting to become the Root.
Access:
read-only.
Status:
mandatory.
134
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapBridgeForwardDelay { tl1stapBridgeState 13 }
Syntax:
INTEGER (4..30)
Definition:
The value of the Forward Delay parameter when the bridge is the
Root or is attempting to become the Root.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1stapHoldTime { tl1stapBridgeState 14 }
Syntax:
INTEGER
Definition:
The parameter specifies the minimum time period between the
transmission of Configuration BPDU's through a given Bridge Port.
No more than two Configuration BPDU's can be transmitted in any
Hold Time period.
Access:
read-only.
Status:
mandatory.
135
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapPortStateTable { tl1stap 4 }
Syntax:
SEQUENCE of tl1stapPortStateEntry
Definition:
A set of items containing current port information such as Port
Identifier, Port State, Path Cost, current designated parameters,
and other port indicators. Each parameter is instantiated by
logical interface number (1..ifNumber).
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1stapPortStateEntry { tl1stapPortStateTable 1 }
Syntax:
tl1stapPortStateEntry ::= SEQUENCE {
tl1stapPortIdentifier
INTEGER,
tl1stapPortState
INTEGER,
tl1stapPathCost
INTEGER,
tl1stapPDesignatedRoot
OCTET STRING,
tl1stapPDesignatedCost
INTEGER,
tl1stapPDesignatedBridge
OCTET STRING,
tl1stapPDesignatedPort
INTEGER,
tl1stapPTopologyChangeAck
INTEGER,
tl1stapPConfigPending
INTEGER
}
136
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1stapPortIdentifier { tl1stapPortStateEntry 1 }
Syntax:
INTEGER
Definition:
The Port Identifier of the associated Port. This parameter is
used as the value of the Port Identifier parameter of all
Configuration BPDUs transmitted on the associated port.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1stapPortState { tl1stapPortStateEntry 2 }
Syntax:
INTEGER {
Disabled(0),
Listening(1),
Learning(2),
Forwarding(3),
Blocking(4)
}
Definition:
The current State of the Port.
Access:
read-only.
Status:
mandatory.
137
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapPathCost { tl1stapPortStateEntry 3 }
Syntax:
INTEGER (1..65535)
Definition:
The contribution of the path through this port, when the port is
the Root Port, to the total cost of the path to the Root for this
bridge.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1stapPDesignatedRoot { tl1stapPortStateEntry 4 }
Syntax:
OCTET STRING (SIZE 8)
Definition:
The unique Bridge Identifier of the bridge recorded as the Root
in the Root Identifier parameter of Configuration BPDU's
transmitted by the Designated Bridge for the LAN to which the
port is attached.
Access:
read-only.
Status:
mandatory.
138
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapPDesignatedCost { tl1stapPortStateEntry 5 }
Syntax:
INTEGER
Definition:
The cost of the path to the Root offered by the Designated Port
on the LAN to which this port is attached.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1stapPDesignatedBridge { tl1stapPortStateEntry 6 }
Syntax:
OCTET STRING (SIZE 8)
Definition:
The unique Bridge Identifier of the bridge believed to be the
Designated Bridge for the LAN associated with the port.
Access:
read-only.
Status:
mandatory.
139
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapPDesignatedPort { tl1stapPortStateEntry 7 }
Syntax:
INTEGER
Definition:
The Port Identifier of the Bridge Port believed to be the
Designated Port for the LAN associated with the port.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1stapPTopologyChangeAck { tl1stapPortStateEntry 8 }
Syntax:
INTEGER (
TRUE(1),
FALSE(0)
)
Definition:
The value of the Topology Change Acknowledgement flag in the next
Configuration BPDU to be transmitted on the associated port.
Access:
read-only.
Status:
mandatory.
140
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1stapPConfigPending { tl1stapPortStateEntry 9 }
Syntax:
INTEGER (
TRUE(1),
FALSE(0)
)
Definition:
A flag set to record whether a Configuration BPDU should be
transmitted on expiry of the Hold Timer for the associated port.
Access:
read-only.
Status:
mandatory.
2.13. TL1 PPP Group
OBJECT:
tl1pppInfoTable { tl1ppp 1 }
Syntax:
SEQUENCE of tl1pppInfoEntry
Definition:
This is a set of items which define the flags indicating an open
event for LCP phase, and NCP phases. Also it contains timeout
values for LQD phase. Each variable is instantiated by logical
interface number (1..ifNumber).
Access:
read-write.
Status:
mandatory.
141
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1pppInfoEntry { tl1pppInfoTable 1 }
Syntax:
tl1pppInfoEntry ::= SEQUENCE {
tl1pppLcpAO
INTEGER,
tl1pppIpcpAO
INTEGER,
tl1pppIdpcpAO
INTEGER,
tl1pppIpxcpAO
INTEGER,
tl1pppLqdTimeout
INTEGER
}
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1pppLcpAO { tl1pppInfoEntry 1 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
This is a flag indicating an open event for LCP phase.
Access:
read-write.
Status:
mandatory.
Default:
FALSE(0)
142
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1pppIpcpAO { tl1pppInfoEntry 2 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
This is a flag indicating an open event for negotiation of the
Network Control Protocol IP phase during the NCP phase.
Access:
read-write.
Status:
mandatory.
Default:
FALSE(0)
OBJECT:
tl1pppIdpcpAO { tl1pppInfoEntry 3 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
This is a flag indicating an open event for negotiation of the
Network Control Protocol IDP phase during the NCP phase.
Access:
read-write.
Status:
mandatory.
Default:
FALSE(0)
143
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1pppIpxcpAO { tl1pppInfoEntry 4 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
This is a flag indicating an open event for negotiation of the
Network Control Protocol IDP phase during the NCP phase.
Access:
read-write.
Status:
mandatory.
Default:
FALSE(0)
OBJECT:
tl1pppLqdTimeout { tl1pppInfoEntry 5 }
Syntax:
INTEGER
Definition:
This is an amount of time to wait for the PPP peer to complete
processing its Link Quality Determination Phase.
Access:
read-write.
Status:
mandatory.
144
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1pppPhaseTable { tl1ppp 2 }
Syntax:
SEQUENCE of tl1pppPhaseEntry
Definition:
This is a set of items, one for the LCP phase and for each NCP
phase. It defines the counters for loop avoidance and timeout
values for Configuration Request, Termination Requests and
Restarting of PPP. Each variable is instantiated by logical
interface number (1..ifNumber) and by the Phase being processed
(1..Maximum number of Phases).
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1pppPhaseEntry { tl1NcpPhaseTable 1 }
Syntax: tl1pppPhaseEntry ::= SEQUENCE {
tl1pppCrCount
INTEGER,
tl1pppTrCount
INTEGER,
tl1pppCtTimeout
INTEGER,
tl1pppRsTimeout
INTEGER
}
Access:
read-write.
Status:
mandatory.
145
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1pppCrCount { tl1pppPhaseEntry 1 }
Syntax:
INTEGER
Definition:
This is a loop avoidance count of Configuration Requests to be
sent out during the phase instantiated (LCP, IPCP, IDPCP, or
IPXCP).
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1pppTrCount { tl1pppPhaseEntry 2 }
Syntax:
INTEGER
Definition:
This is a loop avoidance count of Termination Requests to be sent
out during the phase instantiated (LCP, IPCP, IDPCP, or IPXCP).
Access:
read-write.
Status:
mandatory.
146
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1pppCtTimeout { tl1pppPhaseEntry 3 }
Syntax:
INTEGER
Definition:
This is the timeout value to wait for a response to a
Configuration Request or a Termination Request during the phase
instantiated (LCP, IPCP, IDPCP, or IPXCP).
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1pppRsTimeout { tl1pppPhaseEntry 4 }
Syntax:
INTEGER
Definition:
This is the amount of time to wait after trying the specified
loop avoidance Configuration Requests before starting
initialization of the phase instantiated (LCP, IPCP, IDPCP, or
IPXCP).
Access:
read-write.
Status:
mandatory.
147
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1pppStatTable { tl1ppp 3 }
Syntax:
SEQUENCE of tl1pppStatEntry
Definition:
This is a set of items which contain counts of various bad record
received. It also contains counts of Configuration Requests sent,
Configuration Requests received and Termination Requests
received. Each variable is instantiated by logical interface
number (1..ifNumber).
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1pppStatEntry { tl1pppStatTable 1 }
Syntax:
tl1pppBadProtocol ::= SEQUENCE {
tl1pppBadProtocol
Counter,
tl1pppBadAddress
Counter,
tl1pppBadLcp
Counter,
tl1pppBadIpcp
Counter,
tl1pppBadIdpcp
Counter,
tl1pppBadIpxcp
Counter,
tl1pppNumCrSent
Counter,
tl1pppNumCrRecd
Counter,
tl1pppNumTrRecd
Counter
}
Access:
read-only.
Status:
mandatory.
148
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1pppBadProtocol { tl1pppStatEntry 1 }
Syntax:
Counter
Definition:
This is the counter containing the number of unrecognizable
protocol fields received.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1pppBadAddress { tl1pppStatEntry 2 }
Syntax:
Counter
Definition:
This is the counter containing the number of packets received
with a bad address field.
Access:
read-only.
Status:
mandatory.
149
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1pppBadLcp { tl1pppStatEntry 3 }
Syntax:
Counter
Definition:
This is the counter containing the number of packets received
with a bad LCP Code field.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1pppBadIpcp { tl1pppStatEntry 4 }
Syntax:
Counter
Definition:
This is the counter containing the number of packets received
with a bad IPCP Code field.
Access:
read-only.
Status:
mandatory.
150
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1pppBadIdpcp { tl1pppStatEntry 5 }
Syntax:
Counter
Definition:
This is the counter containing the number of packets received
with a bad IDPCP Code field.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1pppBadIpxcp { tl1pppStatEntry 6 }
Syntax:
Counter
Definition:
This is the counter containing the number of packets received
with a bad IPXCP Code field.
Access:
read-only.
Status:
mandatory.
151
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1pppNumCrSent { tl1pppStatEntry 7 }
Syntax:
Counter
Definition:
This is the counter containing the number of Configuration
Request packets sent.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1pppNumCrRecd { tl1pppStatEntry 8 }
Syntax:
Counter
Definition:
This is the counter containing the number of Configuration
Request packets received.
Access:
read-only.
Status:
mandatory.
152
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1pppNumTrRecd { tl1pppStatEntry 9 }
Syntax:
Counter
Definition:
This is the counter containing the number of Termination Request
packets received.
Access:
read-only.
Status:
mandatory.
2.14. TL1 SRTB Group
OBJECT:
tl1srtbInternalLanEnabled { tl1srtb 1 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
The flag that indicates whether the bridge has a virtual internal
LAN configured. The virtual internal LAN is used whenever
multiple Bridge Numbers are required for Source Route Bridging.
Access:
read-write.
Status:
mandatory.
153
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbInternalLanId { tl1srtb 2 }
Syntax:
INTEGER (0..4095)
Definition:
The LAN Identifier for the virtual internal LAN.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbUpTime { tl1srtb 3 }
Syntax:
TimeTicks
Definition:
The count in hundredths of seconds of the time elapsed since the
bridge was last reset or initialized.
Access:
read-only.
Status:
mandatory.
154
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbPortParamsTable { tl1srtb 4 }
Syntax:
SEQUENCE OF tl1srtbPortParamsEntry
Definition:
The bridge port parameters table. Each entry provides the values
for the parameters associated with a given port of the bridge.
Each entry is instantiated by logical interface number
(1..ifNumber).
Access:
read-write.
Status:
Mandatory.
OBJECT:
tl1srtbPortParamsEntry { tl1srtbPortParamsTable 1 }
Syntax:
tl1srtbPortParamsEntry ::= SEQUENCE {
tl1srtbBridgeNumber
INTEGER,
tl1srtbRoutingType
INTEGER,
tl1srtbLanId
INTEGER,
tl1srtbIsVLan
INTEGER,
tl1srtbRdLimit
INTEGER,
tl1srtbOutUserPriority
INTEGER,
tl1srtbOutAccessPriority
INTEGER
}
Definition:
A port state entry identifying the parameter settings for a
particular port on the bridge.
Access:
read-write.
Status:
mandatory.
155
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbBridgeNumber { tl1srtbPortParamsEntry 1 }
Syntax:
INTEGER (0..15)
Definition:
The Bridge Number associated with this port. A Bridge Number
uniquely identifies a bridge among multiple SRT bridges spanning
the same two LANs.
Access:
read-write.
Status:
mandatory.
Default:
1
OBJECT:
tl1srtbRoutingType { tl1srtbPortParamsEntry 2 }
Syntax:
INTEGER {
None(255),
TB(0),
SRT(1),
SR(2)
}
Definition:
The Routing Type for this port. Supported values are: No
bridging; Transparent only; Source Routing and Transparent; and,
Source Routing only.
Access:
read-write.
Status:
mandatory.
Default:
0
156
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbLanId { tl1srtbPortParamsEntry 3 }
Syntax:
INTEGER (0..4095)
Definition:
The LAN identifier for the LAN to which this port is attached.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbIsVLan { tl1srtbPortParamsEntry 4 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
The flag indicating whether the network to which this port is
attached is part of a wide area network Virtual LAN.
Access:
read-write.
Status:
mandatory.
157
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbRdLimit { tl1srtbPortParams 5 }
Syntax:
INTEGER (0..14)
Definition:
The Route Designators Limit for this port. This variable
determines the maximum number of route designators that the
bridge will permit in an explorer frame.
Access:
read-write.
Status:
mandatory.
Default:
14
OBJECT:
tl1srtbOutUserPriority { tl1srtbPortParamsEntry 6 }
Syntax:
INTEGER (0..7)
Definition:
The Outbound User Priority.
Access:
read-write.
Status:
mandatory.
158
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbOutAccessPriority
{ tl1srtbPortParamsEntry 7 }
Syntax:
INTEGER (0..7)
Definition:
The Outbound Access Priority.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbPortCounterTable { tl1srtb 5 }
Syntax:
SEQUENCE OF tl1srtbPortCounterEntry
Definition:
The table of counters associated with each bridge port. Each
variable is instantiated by logical interface number
(1..ifNumber).
Access:
read-only.
Status:
mandatory.
159
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbPortCounterEntry
{ tl1srtbPortCounterTable 1 }
Syntax:
tl1srtbPortCounterEntry ::= SEQUENCE {
tl1srtbInTSFramesReceived
Counter,
tl1srtbInTSFramesDiscarded
Counter,
tl1srtbOutTSFramesFrwd
Counter,
tl1srtbDiscardBuffers
Counter,
tl1srtbDiscardTransitDelay
Counter,
tl1srtbDiscardOnError
Counter,
tl1srtbInvalidRi
Counter,
tll1srtbLanIdMismatch
Counter,
tl1srtbDupLanIdOrTreeError
Counter,
tl1srtbDiscardHopCountExcd
Counter,
tl1srtbExplorerFramesFrwd
Counter,
tl1srtbExplorerOctetsFrwd
Counter,
tl1srtbNonExplorFramesFrwd
Counter,
tl1srtbNonExplorOctetsFrwd
Counter,
tl1srtbTotalSRFrwd
Counter,
tl1srtbValidSRFramesReceived
Counter,
tl1srtbValidExplorOctetsRcvd
Counter,
tl1srtbValidSRDiscarded
Counter,
tl1srtbTotalSRDiscarded
Counter
}
160
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
Definition:
The counters for a particular bridge port.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbInTSFramesReceived
{ tl1srtbPortCounterEntry 1 }
Syntax:
Counter
Definition:
The count of valid Transparent Spanning frames received.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbInTSFramesDiscarded
{ tl1srtbPortCounterEntry 2 }
Syntax:
Counter
Definition:
The count of valid Transparent Spanning frames received which
were discarded by the Forwarding Process.
Access:
read-only.
Status:
mandatory.
161
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbOutTSFramesFrwd { tl1srtbPortCounterEntry 3 }
Syntax:
Counter
Definition:
The count of all Transparent Spanning frames forwarded to the
associated MAC entity.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbDiscardBuffers { tl1srtbPortCounterEntry 4 }
Syntax:
Counter
Definition:
The count of all bridged frames (transparent and source routed)
that were to be transmitted through the associated port, but were
discarded due to a lack of buffers.
Access:
read-only.
Status:
mandatory.
162
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbDiscardTransitDelay
{ tl1srtbPortCounterEntry 5 }
Syntax:
Counter
Definition:
The count of all bridged frames (transparent and source routed)
that were to be transmitted through the associated port, but were
discarded due to a maximum bridge transit delay being exceeded
(buffering may have been available).
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbDiscardOnError { tl1srtbPortCounterEntry 6 }
Syntax:
Counter
Definition:
The count of all bridged frames (transparent and source routed)
which were to be forwarded on the associated MAC but could not
be transmitted (e.g., frame would be too large).
Access:
read-only.
Status:
mandatory.
163
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbInvalidRi { tl1srtbPortCounterEntry 7 }
Syntax:
Counter
Definition:
The count of source routed frames discarded because the RI field
contains a duplicate LOUT specification, has an odd length, has a
length of 0 or 4, or is an explorer frame with D=1.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbLanIdMismatch { tl1srtbPortCounterEntry 8 }
Syntax:
Counter
Definition:
The count of explorer frames discarded because the last LAN ID in
the routing information field does not match the LAN ID of the
input port.
Access:
read-only.
Status:
mandatory.
164
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbDupLanIdOrTreeError { tl1srtbPortCounterEntry 9 }
Syntax:
Counter
Definition:
Duplicate LAN ID or spanning tree error - the count of spanning
tree explorer frames discarded because the LAN-out ID already
appeared in the routing information field.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbDiscardHopCountExcd
{ tl1srtbPortCounterEntry 10 }
Syntax:
Counter
Definition:
The count of explorer frames received on the associated port that
were discarded because the number of route designators in the
routing information would exceed the RD limit.
Access:
read-only.
Status:
mandatory.
165
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbExplorerFramesFrwd
{ tl1srtbPortCounterEntry 11 }
Syntax:
Counter
Definition:
The count of explorer frames forwarded to the associated MAC.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbExplorerOctetsFrwd
{ tl1srtbPortCounterEntry 12 }
Syntax:
Counter
Definition:
The total octet count for all explorer frames forwarded to the
associated MAC.
Access:
read-only.
Status:
mandatory.
166
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbNonExplorFramesFrwd
{ tl1srtbPortCounterEntry 13 }
Syntax:
Counter
Definition:
The count of non-explorer frames forwarded to the associated MAC.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbNonExplorOctetsFrwd { tl1srtbPortCounterEntry 14 }
Syntax:
Counter
Definition:
The total octet count for all non-explorer frames forwarded to
the associated MAC.
Access:
read-only.
Status:
mandatory.
167
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbTotalSRFrwd { tl1srtbPortCounterEntry 15 }
Syntax:
Counter
Definition:
The total count of source routed frames forwarded to the
associated MAC.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbValidSRFramesReceived
{ tl1srtbPortCounterEntry 16 }
Syntax:
Counter
Definition:
The count of valid source routed frames received on the
associated MAC.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbValidExplorOctetsRcvd
{ tl1srtbPortCounterEntry 17 }
Syntax:
Counter
Definition:
The total octet count for all explorer frames received on the
associated MAC.
Access:
read-only.
Status:
mandatory.
168
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbValidSRDiscarded { tl1srtbPortCounterEntry 18 }
Syntax:
Counter
Definition:
The count of valid source routed frames that are received on the
associated MAC and discarded due to no RI match.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbTotalSRDiscarded { tl1srtbPortCounterEntry 19 }
Syntax:
Counter
Definition:
The total count of all source routed frames that are received on
the associated MAC and discarded.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbFilterDbParams { tl1srtb 6 }
Syntax:
OBJECT IDENTIFIER
Definition:
The group of Filtering Database parameters.
Access:
read-only.
Status:
mandatory.
169
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbFilterDbSize { tl1srtbFilterDbParams 1 }
Syntax:
INTEGER
Definition:
The maximum number of entries that can be held in the Filtering
Database.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbPermDbSize { tl1srtbPermDbParams 2 }
Syntax:
INTEGER
Definition:
The maximum number of entries that can be held in the Permanent
Database.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbNumDynamicEntries { tl1srtbFilterDbParams 3 }
Syntax:
INTEGER
Definition:
The current number of dynamic entries in the Filtering Database.
Access:
read-only.
Status:
mandatory.
170
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbFilterDbAgeingTime { tl1srtbFilterDbParams 4 }
Syntax:
INTEGER
Definition:
The time for ageing out dynamic entries in the Filtering Database
when the port associated with the dynamic entry is in the
forwarding state.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbDynamicFilterDbTable { tl1srtb 7 }
Syntax:
SEQUENCE OF tl1srtbDynamicFilterDbEntry
Definition:
The dynamic entries currently in the Filtering Database. Each
entry is indexed by an entry number (1 .. maximum number of
dynamic entries).
Access:
read-only.
Status:
mandatory.
171
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbDynamicFilterDbEntry
{ tl1srtbDynamicFilterDbTable 1 }
Syntax:
tl1srtbDynamicFilterDbEntry ::= SEQUENCE {
tl1srtbDynamicMacAddr
OCTET STRING,
tl1srtbDynamicPortNumber
INTEGER
}
Definition:
A particular entry in the dynamic portion of the Filtering
Database.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbDynamicMacAddr { tl1srtbDynamicFilterDbEntry 1 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
The MAC address to which the dynamic entry pertains.
Access:
read-only.
Status:
mandatory.
172
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbDynamicPortNumber { tl1srtbDynamicFilterDbEntry 2 }
Syntax:
INTEGER
Definition:
The port (logical interface) through which the end station with
the associated MAC address is located. A value of 0 means that
the associated MAC address is always filtered.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1srtbStaticFilterDbParams { tl1srtb 8 }
Syntax:
OBJECT IDENTIFIER
Definition:
The group of variables that define the Static Filtering Database
entries.
Access:
read-write.
Status:
mandatory.
173
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbStatEntMacAddrTable { tl1srtbStaticFilterDbParams 1 }
Syntax:
SEQUENCE OF tl1srtbStatEntMacAddrEntry
Definition:
The table of MAC addresses for Static Filtering Table
entries. Each entry is indexed by two values. The first value
is the logical interface number for the receive port associated
with the entry. The second value is the entry number (1 ..
maximum number of static entries per port). Note that these two
indices provide for the correlation of a MAC address (and receive
port) with a particular port array specified in the
tl1srtbStatEntPortArrayTable.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbStatEntMacAddrEntry { tl1srtbStatEntMacAddrTable 1 }
Syntax:
tl1srtbStatEntMacAddrEntry ::= SEQUENCE {
tl1srtbStaticEntryMacAddr
OCTET STRING
}
Definition:
A particular Static Filtering Database MAC address entry.
Access:
read-write.
Status:
mandatory.
174
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbStaticEntryMacAddr { tl1srtbStatEntMacAddrEntry 1 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
The MAC address of the Static Filtering Database entry.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbStatEntPortArrayTable
{ tl1srtbStaticFilterDbParams 2 }
Syntax:
SEQUENCE OF tl1srtbStatEntPortArrayEntry
Definition:
The table of port maps for Static Filtering Table entries Each
entry is indexed by three values. The first value is the logical
interface number for the receive port associated with the entry.
The second value is the entry number (1 .. maximum number of
static entries per port). The third value is the logical
interface number for the transmit port associated with the
entry. Note that the first two indices provide for the
correlation of a port array with a particular MAC address
specified in the tl1srtbStatEntMacAddrTable.
Access:
read-write.
Status:
mandatory.
175
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbStatEntPortArrayEntry
{ tl1srtbStatEntPortArrayTable 1 }
Syntax:
tl1srtbStatEntPortArrayEntry ::= SEQUENCE {
tl1srtbStaticEntryPermit
INTEGER
}
Definition:
A particular Static Filtering Database Port Array entry.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbStaticEntryPermit { tl1srtbStatEntPortArrayEntry 1 }
Syntax:
INTEGER {
DENY(0),
PERMIT(1)
}
Definition:
The permit/deny flag of the port array for the Static Filtering
Database entry. This value indicates whether a frame received on
the associated receive port, with the destination MAC address
specified in the associated tl1srtbStatEntMacAddrTable entry, may
be transmitted to the associated transmit port.
Access:
read-write.
Status:
mandatory.
176
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbStatEntSizeTable { tl1srtbStaticFilterDbParams 3 }
Syntax:
SEQUENCE OF tl1srtbStatEntSizeEntry
Definition:
The table of sizes for each element in the Static Filtering
Database. Each entry is instantiated by logical interface number
(1..ifNumber).
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbStatEntSizeEntry { tl1srtbStatEntSizeTable 1 }
Syntax:
tl1srtbStatEntSizeEntry ::= SEQUENCE {
tl1srtbNumStaticEntries
INTEGER
}
Definition:
A particular Static Filtering Database size entry.
Access:
read-write.
Status:
mandatory.
177
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbNumStaticEntries { tl1srtbStatEntSizeEntry 1 }
Syntax:
INTEGER
Definition:
The number of static entries in the Filtering Database.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbNumMacAddrAcfEntrs { tl1srtb 9 }
Syntax:
INTEGER
Definition:
The number of MAC Address Access Control Filtering (ACF) entries
in the MAC Address ACF table.
Access:
read-write.
Status:
mandatory.
178
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbMacAddrAcfTable { tl1srtb 10 }
Syntax:
SEQUENCE OF tl1srtbMacAddrAcfEntry
Definition:
The Bridge Address Access Control Filtering (ACF) Table. The
table entries represent a "deny list", i.e., pairs of addresses
between which communication is not permitted. Each entry is
indexed by an entry number (1 .. maximum number of entries).
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbMacAddrAcfEntry { tl1srtbMacAddrAcfTable 1 }
Syntax:
tl1srtbMacAddrAcfEntry ::= SEQUENCE {
tl1srtbAcfSrcMacAddr
OCTET STRING,
tl1srtbAcfDestMacAddr
OCTET STRING
}
Definition:
An entry in the Bridge Address Access Control Filtering (ACF)
Table specifying a particular pair of source and destination
addresses.
Access:
read-write.
Status:
mandatory.
179
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbAcfSrcMacAddr { tl1srtbMacAddrAcfEntry 1 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
The source MAC Access in the Bridge Address ACF pair.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbAcfDestMacAddr { tl1srtbMacAddrAcfEntry 2 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
The destination MAC Address in the Bridge Address ACF pair.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbMaskAcfInfo { tl1srtb 11 }
Syntax:
OBJECT IDENTIFIER
Definition:
The group of objects that define the Bridge Mask Access Control
Filtering (ACF).
Access:
read-write.
Status:
mandatory.
180
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbMaskAcfParamsTable { tl1srtbMaskAcfInfo 1 }
Syntax:
SEQUENCE OF tl1srtbMaskAcfParamsEntry
Definition:
The table of parameters that describe the Bridge Mask ACF. Each
entry is indexed by the logical interface number of the port for
which the filtering is defined.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbMaskAcfParamsEntry { tl1srtbMaskAcfParamsTable 1 }
Syntax:
tl1srtbMaskAcfParamsEntry ::= SEQUENCE {
tl1srtbNumMaskAcfEntries
INTEGER,
tl1srtbMaskAcfPermit
INTEGER
}
Definition:
An entry in the Bridge Mask ACF parameters table.
Access:
read-write.
Status:
mandatory.
181
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbNumMaskAcfEntries { tl1srtbMaskAcfParamsEntry 1 }
Syntax:
INTEGER
Definition:
The number of Bridge Mask ACF entries defined for the associated
port, i.e., the number of entries in the tl1srtbMaskAcfTable that
pertain to the associated port.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbMaskAcfPermit { tl1srtbMaskAcfParamsEntry 2 }
Syntax:
INTEGER {
DENY(0),
PERMIT(1)
}
Definition:
The permit/deny flag for the Bridge Mask ACF entries that pertain
to the associated port. This value indicates whether the entries
for the associated port define permit or deny conditions.
Access:
read-write.
Status:
mandatory.
182
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbMaskAcfTable { tl1srtbMaskAcfInfo 2 }
Syntax:
SEQUENCE OF tl1srtbMaskAcfEntry
Definition:
The table of Bridge Mask ACF entries. Each entry is indexed by
two values. The first value is the logical interface number of
the port for which the filtering is defined. The second value is
the per port number of entries (1 .. maximum number of entries
per port).
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbMaskAcfEntry { tl1srtbMaskAcfTable 1 }
Syntax:
tl1srtbMaskAcfEntry ::= SEQUENCE {
tl1srtbAcfValue
INTEGER,
tl1srtbAcfMask
INTEGER,
tl1srtbAcfOffset
INTEGER
}
Definition:
An entry in the Bridge Mask ACF table.
Access:
read-write.
Status:
mandatory.
183
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1srtbAcfValue { tl1srtbMaskAcfEntry 1 }
Syntax:
INTEGER
Definition:
The 32 bit "value" for the Mask ACF entry.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbAcfMask { tl1srtbMaskAcfEntry 2 }
Syntax:
INTEGER
Definition:
The 32 bit mask for the Mask ACF entry that identifies the
pertinent bits in the entry "value".
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1srtbAcfOffset { tl1srtbMaskAcfEntry 3 }
Syntax:
INTEGER
Definition:
The 8 bit offset for the Mask ACF entry that identifies the
location of the entry "value" in a frame.
Access:
read-write.
Status:
mandatory.
184
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
2.15. TL1 OSPF Group
OBJECT:
tl1ospfRtrId { tl1ospf 1 }
Syntax:
IpAddress
Definition:
This is the 32-bit Ospf Router Identifier.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ospfAreaTable { tl1ospf 2 }
Syntax:
SEQUENCE of tl1ospfAreaEntry
Definition:
This is a set of items, one for each ospf area, that define the
area identification and networks contained in the area. Each
variable is instantiated by the area number (1..maximum number of
areas).
Access:
read-write
Status:
mandatory.
185
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfAreaEntry { tl1ospfAreaTable 1 }
Syntax:
tl1ospfAreaEntry ::= SEQUENCE {
tl1ospfAreaID
INTEGER,
tl1ospfAuthType
INTEGER,
tl1ospfNetCount
INTEGER
}
Access:
read-write
Status:
mandatory.
OBJECT:
tl1ospfAreaID { tl1ospfAreaEntry 1 }
Syntax:
INTEGER (0..65535)
Definition:
This is the identifier for an Ospf area. The value -1 indicates
that there is no area id. Area 0 is specified for the OSPF
backbone.
Access:
read-write.
Status:
mandatory.
186
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfAuthType { tl1ospfAreaEntry 2 }
Syntax:
INTEGER (0..1)
Definition:
This is the Authorization type for the specified area. No
Authorization code = 0; Simple password authorization = 1.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ospfNetCount { tl1ospfAreaEntry 3 }
Syntax:
INTEGER (0..128)
Definition:
This is a count of the number of network/address ranges in the
area.
Access:
read-write.
Status:
mandatory.
187
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfAreaNetTable { tl1ospf 3 }
Syntax:
SEQUENCE of tl1ospfAreaNetEntry
Definition:
This is a set of network/address ranges in each area. Each
variable is instantiated by the area number followed by the
network/address pair number (1 ... tl1ospfNetCount).
Access:
read-write
Status:
mandatory.
OBJECT:
tl1ospfAreaNetEntry { tl1ospfAreaNetTable 1 }
Syntax:
tl1ospfAreaNetEntry ::= SEQUENCE {
tl1ospfNet
IpAddress,
tl1ospfMask
IpAddress
}
Access:
read-write
Status:
mandatory.
188
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfNet { tl1ospfAreaNetEntry 1 }
Syntax:
IpAddress
Definition:
This is the address of a network/address range in the area.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ospfMask { tl1ospfAreaNetEntry 2 }
Syntax:
IpAddress
Definition:
This is the network mask defining the address range in
conjunction with the ospfNet.
Access:
read-write.
Status:
mandatory.
189
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfVirtualIfTable { tl1ospf 4 }
Syntax:
SEQUENCE of tl1ospfVirtualIfEntry
Definition:
This is a set of items, one for each ospf virtual link, that
define the neighbor router and transit area for the virtual
backbone link. Each variable in this table is instantiated by a
virtual link number (1..maximum number of virtual links).
Access:
read-write
Status:
mandatory.
OBJECT:
tl1ospfVirtualIfEntry { tl1ospfVirtualIfTable 1 }
Syntax:
tl1ospfVirtualIfEntry ::= SEQUENCE {
tl1ospfNbrId
IpAddress,
tl1ospfTransArea
INTEGER,
tl1ospfTransDelay
INTEGER,
tl1ospfRxmtIntvl
INTEGER,
tl1ospfHelloIntvl
INTEGER,
tl1ospfRtrDeadIntvl
INTEGER,
tl1ospfAuthKey
OCTET STRING
}
Status:
mandatory.
190
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfNbrId { tl1ospfVirtualIfEntry 1 }
Syntax:
IpAddress
Definition:
This is the neighbor router id for an Ospf virtual link.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ospfTransArea { tl1ospfVirtualIfEntry 2 }
Syntax:
INTEGER (0..65335)
Definition:
This is the Area Id to use to reach the virtual link neighbor
router.
Access:
read-write.
Status:
mandatory.
191
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfTransDelay { tl1ospfVirtualIfEntry 3 }
Syntax:
INTEGER (1..65335)
Definition:
This is the number of seconds it takes to transmit a Link State
Update packet over this interface.
Access:
read-write.
Status:
mandatory.
Default:
2
OBJECT:
tl1ospfRxmtIntvl { tl1ospfVirtualIfEntry 4 }
Syntax:
INTEGER (1..65335)
Definition:
This is the number of seconds between retransmissions of packets
over this interface.
Access:
read-write.
Status:
mandatory.
Default:
5
192
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfHelloIntvl { tl1ospfVirtualIfEntry 5 }
Syntax:
INTEGER (1..65335)
Definition:
This is the number of seconds between transmissions of Hello
packets over this interface. The values must be the same for all
routers connected to a network.
Access:
read-write.
Status:
mandatory.
Default:
30
OBJECT:
tl1ospfRtrDeadIntvl { tl1ospfVirtualIfEntry 6 }
Syntax:
INTEGER (1..65335)
Definition:
This is the number of seconds that a Hello packet has not been
seen before declaring a neighboring router down. The value must
be the same for all routers on a network.
Access:
read-write.
Status:
mandatory.
Default:
90
193
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfAuthKey { tl1ospfVirtualIfEntry 7 }
Syntax:
OCTET STRING (SIZE 8)
Definition:
This is the authentication password for the network if
authorization type is set to 1 for the area containing the
network.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ospfIntfTable { tl1ospf 5 }
Syntax:
SEQUENCE of tl1ospfIntfEntry
Definition:
This is a set of items, one for each interface, that define the
area, type, and parameters for the ospf interface. Each variable
is instantiated by logical interface number (1..ifNumber).
Access:
read-write
Status:
mandatory.
194
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfIntfEntry { tl1ospfIntfTable 1 }
Syntax:
tl1ospfIntfEntry ::= SEQUENCE {
tl1ospfIntfRun
INTEGER,
tl1ospfIntfAreaID
INTEGER,
tl1ospfIntfType
INTEGER,
tl1ospfIntfTransDelay
INTEGER,
tl1ospfIntfRxmtIntvl
INTEGER,
tl1ospfIntfHelloIntvl
INTEGER,
tl1ospfIntfRtrDeadIntvl
INTEGER,
tl1ospfIntfPriority
INTEGER,
tl1ospfIntfAuthKey
OCTET STRING,
tl1ospfIntfPollIntvl
INTEGER,
tl1ospfIntfPtopIntAddr
IpAddress
}
Access:
read-write
Status:
mandatory.
195
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfIntfRun { tl1ospfIntfEntry 1 }
Syntax:
INTEGER {
RUN(1),
DONT-RUN(0)
}
Definition:
This is the flag which tells if ospf should be run on a
particular interface. A value of 1 indicates ospf should be run,
a value of 0 turns ospf off and makes the interface an ospf
external.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ospfIntfAreaID { tl1ospfIntfEntry 2 }
Syntax:
INTEGER (0..65335)
Definition:
This is the ospf Area associated with the interface.
Access:
read-write.
Status:
mandatory.
196
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfIntfType { tl1ospfIntfEntry 3 }
Syntax:
INTEGER (1..3)
Definition:
This is the ospf type for the interface. The legal types are 1:
Broadcast; 2: NonBroadcast MultiAccess; and 3: Point to Point.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ospfIntfTransDelay { tl1ospfIntfEntry 4 }
Syntax:
INTEGER (1..65335)
Definition:
This is the number of seconds it takes to transmit a Link State
Update packet over this interface.
Access:
read-write.
Status:
mandatory.
Default:
2
197
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfIntfRxmtIntvl { tl1ospfIntfEntry 5 }
Syntax:
INTEGER (1..65335)
Definition:
This is the number of seconds between retransmissions of packets
over this interface.
Access:
read-write.
Status:
mandatory.
Default:
5
OBJECT:
tl1ospfIntfHelloIntvl { tl1ospfIntfEntry 6 }
Syntax:
INTEGER (1..65335)
Definition:
This is the number of seconds between transmissions of Hello
packets over this interface. The values must be the same for all
routers connected to a network.
Access:
read-write.
Status:
mandatory.
Default:
30
198
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfIntfRtrDeadIntvl { tl1ospfIntfEntry 7 }
Syntax:
INTEGER (1..65335)
Definition:
This is the number of seconds that a Hello packet has not been
seen before declaring a neighboring router down. The value must
be the same for all routers on a network.
Access:
read-write.
Status:
mandatory.
Default:
90
OBJECT:
tl1ospfIntfPriority { tl1ospfIntfEntry 8 }
Syntax:
INTEGER (1..254)
Definition:
This is the priority to be used/sent by this router. This
priority determines DR and BDR selection. A priority of 255
makes this router ineligible to be DR or BDR.
Access:
read-write.
Status:
mandatory.
199
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfIntfAuthKey { tl1ospfIntfEntry 9 }
Syntax:
OCTET STRING (SIZE 8)
Definition:
This is the authentication password for the network if
authorization type is set to 1 for the area containing the
network.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ospfIntfPollIntvl { tl1ospfIntfEntry 10 }
Syntax:
INTEGER (1..65335)
Definition:
This is the number of seconds between transmissions of Polled
Hello packets over this interface.
Access:
read-write.
Status:
mandatory.
Default:
90
200
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfIntfPtopIntAddr { tl1ospfIntfEntry 11 }
Syntax:
IpAddress
Definition:
This is the Ip address to be used as the source address for
messages sent over an ospf Point to Point link which is also set
up as an IP Remote Gateway.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ospfNBMATable { tl1ospf 6 }
Syntax:
SEQUENCE OF tl1ospfNBMAEntry
Definition:
This is a table of neighbor/priority pairs for NBMA links. Each
variable is instantiated by a pair of numbers. The first is the
logical interface number (1..ifNumber); the second is an NBMA
index (1..ospfmaxnbma).
Access:
read-write.
Status:
mandatory
201
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfNBMAEntry { tl1ospfNBMATable 1 }
Syntax:
tl1ospfNBMAEntry ::= SEQUENCE {
tl1ospfAttRtrIpAddr
IpAddress,
tl1ospfArPriority
INTEGER
}
Access:
read-write.
Status:
mandatory
OBJECT:
tl1ospfAttRtrIpAddr { tl1ospfNBMAEntry 1 }
Syntax:
IpAddress
Definition:
This is a set of neighbor IP addresses for NBMA links where the
neighbors cannot be discovered via multicast. Every neighbor
must be configured here in order to have hello packets accepted.
Access:
read-write.
Status:
mandatory.
202
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfArPriority { tl1ospfNBMAEntry 2 }
Syntax:
INTEGER (1..255)
Definition:
This is the priority associated with this neighbor. This priority
determines DR and BDR selection. A priority of 0 makes this
router ineligible to be DR or BDR. This priority may be
overridden if the neighbor is configured with a different
priority.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ospfCumlogTable { tl1ospf 7 }
Syntax:
SEQUENCE OF tl1ospfCumLogEntry
Definition:
This is an array of counts of messages sent, received, and
discarded due to message or state errors. Each counter is
instantiated by a array index (1..LASTLOG).
Access:
read-only.
Status:
mandatory.
203
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfCumlogEntry { tl1ospfCumLogTable 1 }
Syntax:
tl1ospfCumLogEntry ::= SEQUENCE {
tl1ospfStat
Counter
}
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ospfStat { tl1ospfCumLogEntry 1 }
Syntax:
Counter
Definition:
Each entry in this array is a count of messages sent, received,
and discarded due to message or state errors.
Access:
read-only.
Status:
mandatory.
204
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfIntfTOSTable { tl1ospf 8 }
Syntax:
SEQUENCE OF tl1ospfIntfTOSEntry
Definition:
This is a table of interface and Type of Service relations. Each
variable is instantiated by a pair of numbers; first, the logical
interface number (1..ifNumber); second, the TOS level (1..8).
Access:
read-write.
Status:
mandatory
OBJECT:
tl1ospfIntfTOSEntry { tl1ospfIntfTOSTable 1 }
Syntax:
tl1ospfIntfTOSEntry ::= SEQUENCE {
tl1ospfIfTOSCost
INTEGER
}
Access:
read-write.
Status:
mandatory
205
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ospfIfTOSCost { tl1ospfIntfTOSEntry 1 }
Syntax:
INTEGER (0..65335)
Definition:
This is the ospf cost of the interface for a specified Type of
Service.
Access:
read-write.
Status
mandatory.
2.16. TL1 TOK Group
OBJECT:
tl1tokConfigTable { tl1tok 1 }
Syntax:
SEQUENCE OF tl1tokConfigEntry
Definition:
This is a table of configuration parameters for Token Ring 802.5
given on a per interface basis. Each parameter is instantiated
by logical interface number (1..ifNumber).
Access:
read-write.
Status:
mandatory
206
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1tokConfigEntry { tl1tokConfigTable 1 }
Syntax:
tl1tokConfigEntry ::= SEQUENCE {
tl1tokEarlyTokenRelease
INTEGER,
tl1tokRingSpeed
INTEGER
}
Access:
read-write.
Status:
mandatory
OBJECT:
tl1tokEarlyTokenRelease { tl1tokConfigEntry 2 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
This flag indicates whether to release the token early (only
16Mbps ring speed).
Access:
read-write.
Status:
mandatory.
207
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1tokRingSpeed { tl1tokConfigEntry 3 }
Syntax:
INTEGER {
4-Mbps(0),
16-Mbps(1)
}
Definition:
This value designates the Token Ring speed.
Access:
read-write.
Status:
mandatory.
2.17. TL1 IPX Group
OBJECT:
tl1ipxInterfaceTable { tl1ipx 1 }
Syntax:
SEQUENCE OF tl1ipxInterfaceEntry
Definition:
This is a set of flags, two for each interface, that indicates
whether the interface should be a route supplier and whether the
interface should generate checksums. Each variable is
instantiated by logical interface number (1..ifNumber).
Access:
read-write
Status:
mandatory.
208
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxInterfaceEntry { tl1ipxInterfaceTable 1 }
Syntax:
tl1ipxInterfaceEntry ::= SEQUENCE {
tl1ipxRouteSupplier
INTEGER
}
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxRouteSupplier { tl1ipxInterfaceEntry 1 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
This flag indicates that the specified interface is a routing
information supplier.
Access:
read-write.
Status:
mandatory.
Default:
TRUE(1)
209
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxBroadcastInterval { tl1ipx 2 }
Syntax:
INTEGER
Definition:
This is the broadcast interval ,in seconds, for the broadcast of
routing information by a routing information supplier.
Access:
read-write.
Status:
mandatory.
Default:
30
OBJECT:
tl1ipxRouteTimeout { tl1ipx 3 }
Syntax:
INTEGER
Definition:
This is the timeout value, in seconds, for the discard of
nonupdated routing table entries.
Access:
read-write.
Status:
mandatory.
Default:
180
210
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxWellKnownGatewayNet { tl1ipx 4 }
Syntax:
INTEGER
Definition:
This is the well known gateway network.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxWellKnownGatewayHost { tl1ipx 5 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is the well known gateway host address.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxNbrStaticRoutes { tl1ipx 6 }
Syntax:
INTEGER
Definition:
This is the number of IPX static routes currently maintained in
non-volatile RAM.
Access:
read-write.
Status:
mandatory.
211
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxStaticRouteTable { tl1ipx 7 }
Syntax:
SEQUENCE OF tl1ipxStaticRouteEntry
Definition:
This is the static routing table. Each variable is instantiated
by an index (1..maximum number of IPX static routes).
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxStaticRouteEntry { tl1ipxStaticRouteTable 1 }
Syntax:
tl1ipxStaticRouteEntry ::= SEQUENCE {
tl1ipxStaticRouteNetwork
INTEGER,
tl1ipxStaticRouteGatewayNet
INTEGER,
tl1ipxStaticRouteGatewayHost
OCTET STRING,
tl1ipxStaticRouteCost
INTEGER,
tl1ipxStaticRouteOverride
INTEGER
}
Access:
read-write.
Status:
mandatory.
212
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxStaticRouteNetwork { tl1ipxStaticRouteEntry 1 }
Syntax:
INTEGER
Definition:
This is the network address of the destination.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxStaticRouteGatewayNet { tl1ipxStaticRouteEntry 2 }
Syntax:
INTEGER
Definition:
This is the gateway network used to route to the network address.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxStaticRouteGatewayHost { tl1ipxStaticRouteEntry 3 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is the gateway host used to route to the network address.
Access:
read-write.
Status:
mandatory.
213
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxStaticRouteCost { tl1ipxStaticRouteEntry 4 }
Syntax:
INTEGER (0..255)
Definition:
This is the cost to route to the network address.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxStaticRouteOverride { tl1ipxStaticRouteEntry 5 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
This flag indicates that this route should override the dynamic
route.
Access:
read-write.
Status:
mandatory.
214
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxNbrFilters { tl1ipx 8 }
Syntax:
INTEGER
Definition:
This is the number of IPX filters currently maintained in
non-volatile RAM.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxFilterTable { tl1ipx 9 }
Syntax:
SEQUENCE OF tl1ipxFilterEntry
Definition:
This is IPX filter table. Each variable is instantiated by an
index into the filter table (1..maximum number of filter table
entries).
Access:
read-write.
Status:
mandatory.
215
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxFilterEntry { tl1ipxFilterTable 1 }
Syntax:
tl1ipxFilterEntry ::= SEQUENCE {
tl1ipxFilterSourceMask
INTEGER,
tl1ipxFilterSourceNet
INTEGER,
tl1ipxFilterSourceHost
OCTET STRING,
tl1ipxFilterDestinationMask
INTEGER,
tl1ipxFilterDestinationNet
INTEGER,
tl1ipxFilterDestinationHost
OCTET STRING,
tl1ipxFilterNbrExceptions
INTEGER
}
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxFilterSourceMask { tl1ipxFilterEntry 1 }
Syntax:
INTEGER
Definition:
This is the mask to be applied to the source network from the
incoming datagram.
Access:
read-write.
Status:
mandatory.
216
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxFilterSourceNet { tl1ipxFilterEntry 2 }
Syntax:
INTEGER
Definition:
This is the source network to be filtered.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxFilterSourceHost { tl1ipxFilterEntry 3 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is the source host to be filtered. A value of zero indicates
all hosts.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxFilterDestinationMask { tl1ipxFilterEntry 4 }
Syntax:
INTEGER
Definition:
This is the mask to be applied to the destination network from
the incoming datagram.
Access:
read-write.
Status:
mandatory.
217
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxFilterDestinationNet { tl1ipxFilterEntry 5 }
Syntax:
INTEGER
Definition:
This is the destination network to be filtered.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxFilterDestinationHost { tl1ipxFilterEntry 6 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is the destination host to be filtered. A value of zero
indicates all hosts.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxFilterNbrExceptions { tl1ipxFilterEntry 7 }
Syntax:
INTEGER
Definition:
This is the number of exceptions for this filter entry.
Access:
read-write.
Status:
mandatory.
218
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxFilterExceptionTable { tl1ipx 10 }
Syntax:
SEQUENCE OF tl1ipxFilterExceptionEntry
Definition:
This is the list of exceptions for a designated filter table
entry. Each first is instantiated by two indices; first, the
filter table index; second, the exception table index (1..maximum
number of exceptions).
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxFilterExceptionEntry { tl1ipxFilterExceptionTable 1 }
Syntax:
tl1ipxFilterExceptionEntry ::= SEQUENCE {
tl1ipxFilterExceptionSrcNet
INTEGER,
tl1ipxFilterExceptionSrcHost
OCTET STRING,
tl1ipxFilterExceptionDstNet
INTEGER,
tl1ipxFilterExceptionDstHost
OCTET STRING
}
Access:
read-write.
Status:
mandatory.
219
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxFilterExceptionSrcNet { tl1ipxFilterExceptionEntry 1 }
Syntax:
INTEGER
Definition:
This is the source network to be allowed.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxFilterExceptionSrcHost { tl1ipxFilterExceptionEntry 2
}
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is the source host to be allowed. A value of zero indicates
all hosts.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxFilterExceptionDstNet { tl1ipxFilterExceptionEntry 3 }
Syntax:
INTEGER
Definition:
This is the destination network to be allowed.
Access:
read-write.
Status:
mandatory.
220
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxFilterExceptionDstHost { tl1ipxFilterExceptionEntry 4
}
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is the destination host to be allowed. A value of zero
indicates all hosts.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxForwarding { tl1ipx 11 }
Syntax:
INTEGER {
Gateway-thus-forward(1),
Host-thus-dont-forward(2)
}
Definition:
This is the forward datagram flag.
Access:
read-only.
Status:
mandatory.
221
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxInReceives { tl1ipx 12 }
Syntax:
Counter
Definition:
This is the number of datagrams received including errors.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxInHdrErrors { tl1ipx 13 }
Syntax:
Counter
Definition:
This is the number of datagrams discarded due to header errors.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxForwDatagrams { tl1ipx 14 }
Syntax:
Counter
Definition:
This is the number of datagrams successfully forwarded.
Access:
read-only.
Status:
mandatory.
222
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxOutNoRoutes { tl1ipx 15 }
Syntax:
Counter
Definition:
This is the number of outbound datagrams unable to be routed.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxNumStatic { tl1ipx 16 }
Syntax:
Counter
Definition:
This is the number of static routes.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxBadSize { tl1ipx 17 }
Syntax:
Counter
Definition:
This is the number of input messages with a size either too
large or too small.
Access:
read-only.
Status:
mandatory.
223
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxInMsgs { tl1ipx 18 }
Syntax:
Counter
Definition:
This is the number of messages addressed to this device.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxErrInEchos { tl1ipx 19 }
Syntax:
Counter
Definition:
This is the number of echo messages for socket not supported.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxInEchos { tl1ipx 20 }
Syntax:
Counter
Definition:
This is the number of echo type messages received.
Access:
read-only.
Status:
mandatory.
224
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxInEchoReply { tl1ipx 21 }
Syntax:
Counter
Definition:
This is the number of echo reply messages received.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxOutEchoReps { tl1ipx 22 }
Syntax:
Counter
Definition:
This is the number of echo replies output.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxErrInUnspecified { tl1ipx 23 }
Syntax:
Counter
Definition:
This is the number of error input messages of type "unspecified".
Access:
read-only.
Status:
mandatory.
225
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxErrInChecksum { tl1ipx 24 }
Syntax:
Counter
Definition:
This is the number of error input messages of type "checksum".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxErrInSocket { tl1ipx 25 }
Syntax:
Counter
Definition:
This is the number of error input messages of type "socket".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxErrInResources { tl1ipx 26 }
Syntax:
Counter
Definition:
This is the number of error input messages of type "resources".
Access:
read-only.
Status:
mandatory.
226
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxErrInNohost { tl1ipx 27 }
Syntax:
Counter
Definition:
This is the number of error input messages of type "nohost".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxErrInMaxhops { tl1ipx 28 }
Syntax:
Counter
Definition:
This is the number of error input messages of type "maxhops".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxErrInSizetoobig { tl1ipx 29 }
Syntax:
Counter
Definition:
This is the number of error input messages of type "sizetoobig".
Access:
read-only.
Status:
mandatory.
227
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxErrInErrors { tl1ipx 30 }
Syntax:
Counter
Definition:
This is the number of error input messages with unknown error
type.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxInErrors { tl1ipx 31 }
Syntax:
Counter
Definition:
This is the number of input messages with unknown message type.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxErrOutMsgs { tl1ipx 32 }
Syntax:
Counter
Definition:
This is the number of output error messages generated.
Access:
read-only.
Status:
mandatory.
228
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxErrOutErrors { tl1ipx 33 }
Syntax:
Counter
Definition:
This is the number of error type or broadcast input messages with
errors.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxErrOutUnspecified { tl1ipx 34 }
Syntax:
Counter
Definition:
This is the number of output error messages with error type
"unspecified".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxErrOutChecksum { tl1ipx 35 }
Syntax:
Counter
Definition:
This is the number of output error messages with error type
"checksum".
Access:
read-only.
Status:
mandatory.
229
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxErrOutSocket { tl1ipx 36 }
Syntax:
Counter
Definition:
This is the number of output error messages with error type
"socket".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxErrOutResources { tl1ipx 37 }
Syntax:
Counter
Definition:
This is the number of output error messages with error type
"resources".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxErrOutNohost { tl1ipx 38 }
Syntax:
Counter
Definition:
This is the number of output error messages with error type
"nohost".
Access:
read-only.
Status:
mandatory.
230
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxErrOutMaxhops { tl1ipx 39 }
Syntax:
Counter
Definition:
This is the number of output error messages with error type
"maxhops".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxErrOutSizetoobig { tl1ipx 40 }
Syntax:
Counter
Definition:
This is the number of output error messages with error type
"sizetoobig".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxInOwnAddr { tl1ipx 41 }
Syntax:
Counter
Definition:
This is the number of times we received our own rip message.
Access:
read-only.
Status:
mandatory.
231
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxInNoRoutes { tl1ipx 42 }
Syntax:
Counter
Definition:
This is the number of rip messages received with no routes.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxFilter { tl1ipx 43 }
Syntax:
Counter
Definition:
This is the number of messages discarded by filter processing.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxHashHit { tl1ipx 44 }
Syntax:
Counter
Definition:
This is the number of times a route was found in the route table
on the first try.
Access:
read-only.
Status:
mandatory.
232
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxHashMiss { tl1ipx 45 }
Syntax:
Counter
Definition:
This is the number of times a route was not found in the route
table on the first try.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxBadMetric { tl1ipx 46 }
Syntax:
Counter
Definition:
This is the number of routing message entries with maxhops too
big.
Access:
read-only.
Status:
mandatory.
233
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxBadAlloc { tl1ipx 47 }
Syntax:
Counter
Definition:
This is the number of times a route could not be saved due to
lack of resources.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxBadNbr { tl1ipx 48 }
Syntax:
Counter
Definition:
This is the number of rip messages received from a site that is
not a neighbor.
Access:
read-only.
Status:
mandatory.
234
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxBadCommand { tl1ipx 49 }
Syntax:
Counter
Definition:
This is the number of rip messages with unknown routing message
type.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxBadAddr { tl1ipx 50 }
Syntax:
Counter
Definition:
This is the number of routing message entries with bad network
numbers.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1ipxNetworkIntfTable { tl1ipx 51 }
Syntax:
SEQUENCE OF tl1ipxNetworkIntfEntry
Definition:
This is a table that defines the IPX network interface. Each
variable is instantiated by logical interface number
(1..ifNumber).
Access:
read-write
Status:
mandatory.
235
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1ipxNetworkIntfEntry { tl1ipxNetworkIntfTable 1 }
Syntax:
tl1ipxNetworkIntfEntry ::= SEQUENCE {
tl1ipxNetworkMaximumPacket
INTEGER,
tl1ipxNetworkAddress
INTEGER
}
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxNetworkMaximumPacket { tl1ipxNetworkIntfEntry 1 }
Syntax:
INTEGER
Definition:
This is the maximum subnet packet size for the specified
interface.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1ipxNetworkAddress { tl1ipxNetworkIntfEntry 2 }
Syntax:
INTEGER
Definition:
This is the IPX network address.
Access:
read-write.
Status:
mandatory.
236
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
2.18. TL1 XNS Group
OBJECT:
tl1xnsInterfaceTable { tl1xns 1 }
Syntax:
SEQUENCE OF tl1xnsInterfaceEntry
Definition:
This is a set of flags, two for each interface, that indicates
whether the interface should be a route supplier and whether the
interface should generate checksums. Each variable is
instantiated by logical interface number (1..ifNumber).
Access:
read-write
Status:
mandatory.
OBJECT:
tl1xnsInterfaceEntry { tl1xnsInterfaceTable 1 }
Syntax:
tl1xnsInterfaceEntry ::= SEQUENCE {
tl1xnsRouteSupplier
INTEGER,
tl1xnsGenChecksum
INTEGER
}
Access:
read-write.
Status:
mandatory.
237
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsRouteSupplier { tl1xnsInterfaceEntry 1 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
This flag indicates that the specified interface is a routing
information supplier.
Access:
read-write.
Status:
mandatory.
Default:
TRUE(1)
OBJECT:
tl1xnsGenChecksum { tl1xnsInterfaceEntry 2 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
This flag indicates that the specified interface computes
checksums for generated packets.
Access:
read-write.
Status:
mandatory.
Default:
TRUE(1)
238
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsBroadcastInterval { tl1xns 2 }
Syntax:
INTEGER
Definition:
This is the broadcast interval ,in seconds, for the broadcast of
routing information by a routing information supplier.
Access:
read-write.
Status:
mandatory.
Default:
30
OBJECT:
tl1xnsRouteTimeout { tl1xns 3 }
Syntax:
INTEGER
Definition:
This is the timeout value, in seconds, for the discard of
nonupdated routing table entries.
Access:
read-write.
Status:
mandatory.
Default:
180
239
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsWellKnownGatewayNet { tl1xns 4 }
Syntax:
INTEGER
Definition:
This is the well known gateway network.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsWellKnownGatewayHost { tl1xns 5 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is the well known gateway host address.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsNbrStaticRoutes { tl1xns 6 }
Syntax:
INTEGER
Definition:
This is the number of XNS static routes currently maintained in
non-volatile RAM.
Access:
read-write.
Status:
mandatory.
240
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsStaticRouteTable { tl1xns 7 }
Syntax:
SEQUENCE OF tl1xnsStaticRouteEntry
Definition:
This is the static routing table. Each variable is instantiated
by an index (1..maximum number of XNS static routes).
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsStaticRouteEntry { tl1xnsStaticRouteTable 1 }
Syntax:
tl1xnsStaticRouteEntry ::= SEQUENCE {
tl1xnsStaticRouteNetwork
INTEGER,
tl1xnsStaticRouteGatewayNet
INTEGER,
tl1xnsStaticRouteGatewayHost
OCTET STRING,
tl1xnsStaticRouteCost
INTEGER,
tl1xnsStaticRouteOverride
INTEGER
}
Access:
read-write.
Status:
mandatory.
241
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsStaticRouteNetwork { tl1xnsStaticRouteEntry 1 }
Syntax:
INTEGER
Definition:
This is the network address of the destination.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsStaticRouteGatewayNet { tl1xnsStaticRouteEntry 2 }
Syntax:
INTEGER
Definition:
This is the gateway network used to route to the network address.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsStaticRouteGatewayHost { tl1xnsStaticRouteEntry 3 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is the gateway host used to route to the network address.
Access:
read-write.
Status:
mandatory.
242
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsStaticRouteCost { tl1xnsStaticRouteEntry 4 }
Syntax:
INTEGER (0..255)
Definition:
This is the cost to route to the network address.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsStaticRouteOverride { tl1xnsStaticRouteEntry 5 }
Syntax:
INTEGER {
TRUE(1),
FALSE(0)
}
Definition:
This flag indicates that this route should override the dynamic
route.
Access:
read-write.
Status:
mandatory.
243
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsNbrFilters { tl1xns 8 }
Syntax:
INTEGER
Definition:
This is the number of XNS filters currently maintained in
non-volatile RAM.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsFilterTable { tl1xns 9 }
Syntax:
SEQUENCE OF tl1xnsFilterEntry
Definition:
This is XNS filter table. Each variable is instantiated by an
index into the filter table (1..maximum number of filter table
entries).
Access:
read-write.
Status:
mandatory.
244
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsFilterEntry { tl1xnsFilterTable 1 }
Syntax:
tl1xnsFilterEntry ::= SEQUENCE {
tl1xnsFilterSourceMask
INTEGER,
tl1xnsFilterSourceNet
INTEGER,
tl1xnsFilterSourceHost
OCTET STRING,
tl1xnsFilterDestinationMask
INTEGER,
tl1xnsFilterDestinationNet
INTEGER,
tl1xnsFilterDestinationHost
OCTET STRING,
tl1xnsFilterNbrExceptions
INTEGER
}
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsFilterSourceMask { tl1xnsFilterEntry 1 }
Syntax:
INTEGER
Definition:
This is the mask to be applied to the source network from the
incoming datagram.
Access:
read-write.
Status:
mandatory.
245
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsFilterSourceNet { tl1xnsFilterEntry 2 }
Syntax:
INTEGER
Definition:
This is the source network to be filtered.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsFilterSourceHost { tl1xnsFilterEntry 3 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is the source host to be filtered. A value of zero indicates
all hosts.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsFilterDestinationMask { tl1xnsFilterEntry 4 }
Syntax:
INTEGER
Definition:
This is the mask to be applied to the destination network from
the incoming datagram.
Access:
read-write.
Status:
mandatory.
246
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsFilterDestinationNet { tl1xnsFilterEntry 5 }
Syntax:
INTEGER
Definition:
This is the destination network to be filtered.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsFilterDestinationHost { tl1xnsFilterEntry 6 }
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is the destination host to be filtered. A value of zero
indicates all hosts.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsFilterNbrExceptions { tl1xnsFilterEntry 7 }
Syntax:
INTEGER
Definition:
This is the number of exceptions for this filter entry.
Access:
read-write.
Status:
mandatory.
247
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsFilterExceptionTable { tl1xns 10 }
Syntax:
SEQUENCE OF tl1xnsFilterExceptionEntry
Definition:
This is the list of exceptions for a designated filter table
entry. Each first is instantiated by two indices; first, the
filter table index; second, the exception table index (1..maximum
number of exceptions).
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsFilterExceptionEntry { tl1xnsFilterExceptionTable 1 }
Syntax:
tl1xnsFilterExceptionEntry ::= SEQUENCE {
tl1xnsFilterExceptionSrcNet
INTEGER,
tl1xnsFilterExceptionSrcHost
OCTET STRING,
tl1xnsFilterExceptionDstNet
INTEGER,
tl1xnsFilterExceptionDstHost
OCTET STRING
}
Access:
read-write.
Status:
mandatory.
248
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsFilterExceptionSrcNet { tl1xnsFilterExceptionEntry 1 }
Syntax:
INTEGER
Definition:
This is the source network to be allowed.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsFilterExceptionSrcHost { tl1xnsFilterExceptionEntry 2
}
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is the source host to be allowed. A value of zero indicates
all hosts.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsFilterExceptionDstNet { tl1xnsFilterExceptionEntry 3 }
Syntax:
INTEGER
Definition:
This is the destination network to be allowed.
Access:
read-write.
Status:
mandatory.
249
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsFilterExceptionDstHost { tl1xnsFilterExceptionEntry 4
}
Syntax:
OCTET STRING (SIZE 6)
Definition:
This is the destination host to be allowed. A value of zero
indicates all hosts.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsForwarding { tl1xns 11 }
Syntax:
INTEGER {
Gateway-thus-forward(1),
Host-thus-dont-forward(2)
}
Definition:
This is the forward datagram flag.
Access:
read-only.
Status:
mandatory.
250
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsInReceives { tl1xns 12 }
Syntax:
Counter
Definition:
This is the number of datagrams received including errors.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsInHdrErrors { tl1xns 13 }
Syntax:
Counter
Definition:
This is the number of datagrams discarded due to header errors.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsForwDatagrams { tl1xns 14 }
Syntax:
Counter
Definition:
This is the number of datagrams successfully forwarded.
Access:
read-only.
Status:
mandatory.
251
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsOutNoRoutes { tl1xns 15 }
Syntax:
Counter
Definition:
This is the number of outbound datagrams unable to be routed.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsNumStatic { tl1xns 16 }
Syntax:
Counter
Definition:
This is the number of static routes.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsBadSize { tl1xns 17 }
Syntax:
Counter
Definition:
This is the number of input messages with a size either too large
or too small.
Access:
read-only.
Status:
mandatory.
252
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsInMsgs { tl1xns 18 }
Syntax:
Counter
Definition:
This is the number of messages addressed to this device.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsErrInEchos { tl1xns 19 }
Syntax:
Counter
Definition:
This is the number of echo messages for socket not supported.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsInEchos { tl1xns 20 }
Syntax:
Counter
Definition:
This is the number of echo type messages received.
Access:
read-only.
Status:
mandatory.
253
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsInEchoReply { tl1xns 21 }
Syntax:
Counter
Definition:
This is the number of echo reply messages received.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsOutEchoReps { tl1xns 22 }
Syntax:
Counter
Definition:
This is the number of echo replies output.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsErrInUnspecified { tl1xns 23 }
Syntax:
Counter
Definition:
This is the number of error input messages of type "unspecified".
Access:
read-only.
Status:
mandatory.
254
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsErrInChecksum { tl1xns 24 }
Syntax:
Counter
Definition:
This is the number of error input messages of type "checksum".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsErrInSocket { tl1xns 25 }
Syntax:
Counter
Definition:
This is the number of error input messages of type "socket".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsErrInResources { tl1xns 26 }
Syntax:
Counter
Definition:
This is the number of error input messages of type "resources".
Access:
read-only.
Status:
mandatory.
255
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsErrInNohost { tl1xns 27 }
Syntax:
Counter
Definition:
This is the number of error input messages of type "nohost".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsErrInMaxhops { tl1xns 28 }
Syntax:
Counter
Definition:
This is the number of error input messages of type "maxhops".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsErrInSizetoobig { tl1xns 29 }
Syntax:
Counter
Definition:
This is the number of error input messages of type "sizetoobig".
Access:
read-only.
Status:
mandatory.
256
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsErrInErrors { tl1xns 30 }
Syntax:
Counter
Definition:
This is the number of error input messages with unknown error
type.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsInErrors { tl1xns 31 }
Syntax:
Counter
Definition:
This is the number of input messages with unknown message type.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsErrOutMsgs { tl1xns 32 }
Syntax:
Counter
Definition:
This is the number of output error messages generated.
Access:
read-only.
Status:
mandatory.
257
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsErrOutErrors { tl1xns 33 }
Syntax:
Counter
Definition:
This is the number of error type or broadcast input messages with
errors.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsErrOutUnspecified { tl1xns 34 }
Syntax:
Counter
Definition:
This is the number of output error messages with error type
"unspecified".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsErrOutChecksum { tl1xns 35 }
Syntax:
Counter
Definition:
This is the number of output error messages with error type
"checksum".
Access:
read-only.
Status:
mandatory.
258
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsErrOutSocket { tl1xns 36 }
Syntax:
Counter
Definition:
This is the number of output error messages with error type
"socket".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsErrOutResources { tl1xns 37 }
Syntax:
Counter
Definition:
This is the number of output error messages with error type
"resources".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsErrOutNohost { tl1xns 38 }
Syntax:
Counter
Definition:
This is the number of output error messages with error type
"nohost".
Access:
read-only.
Status:
mandatory.
259
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsErrOutMaxhops { tl1xns 39 }
Syntax:
Counter
Definition:
This is the number of output error messages with error type
"maxhops".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsErrOutSizetoobig { tl1xns 40 }
Syntax:
Counter
Definition:
This is the number of output error messages with error type
"sizetoobig".
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsInOwnAddr { tl1xns 41 }
Syntax:
Counter
Definition:
This is the number of times we received our own rip message.
Access:
read-only.
Status:
mandatory.
260
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsInNoRoutes { tl1xns 42 }
Syntax:
Counter
Definition:
This is the number of rip messages received with no routes.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsFilter { tl1xns 43 }
Syntax:
Counter
Definition:
This is the number of messages discarded by filter processing.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsHashHit { tl1xns 44 }
Syntax:
Counter
Definition:
This is the number of times a route was found in the route table
on the first try.
Access:
read-only.
Status:
mandatory.
261
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsHashMiss { tl1xns 45 }
Syntax:
Counter
Definition:
This is the number of times a route was not found in the route
table on the first try.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsBadMetric { tl1xns 46 }
Syntax:
Counter
Definition:
This is the number of routing message entries with maxhops too
big.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsBadAlloc { tl1xns 47 }
Syntax:
Counter
Definition:
This is the number of times a route could not be saved due to
lack of resources.
Access:
read-only.
Status:
mandatory.
262
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsBadNbr { tl1xns 48 }
Syntax:
Counter
Definition:
This is the number of rip messages received from a site that is
not a neighbor.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsBadCommand { tl1xns 49 }
Syntax:
Counter
Definition:
This is the number of rip messages with unknown routing message
type.
Access:
read-only.
Status:
mandatory.
OBJECT:
tl1xnsBadAddr { tl1xns 50 }
Syntax:
Counter
Definition:
This is the number of routing message entries with bad network
numbers.
Access:
read-only.
Status:
mandatory.
263
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsNetworkIntfTable { tl1xns 51 }
Syntax:
SEQUENCE OF tl1xnsNetworkIntfEntry
Definition:
This is a table that defines the XNS network interface. Each
variable is instantiated by logical interface number
(1..ifNumber).
Access:
read-write
Status:
mandatory.
OBJECT:
tl1xnsNetworkIntfEntry { tl1xnsNetworkIntfTable 1 }
Syntax:
tl1xnsNetworkIntfEntry ::= SEQUENCE {
tl1xnsNetworkMaximumPacket
INTEGER,
tl1xnsNetworkAddress
INTEGER
}
Access:
read-write.
Status:
mandatory.
264
Timeplex TIME/LAN 100 Management Information Base
January 7, 1992
OBJECT:
tl1xnsNetworkMaximumPacket { tl1xnsNetworkIntfEntry 1 }
Syntax:
INTEGER
Definition:
This is the maximum subnet packet size for the specified
interface.
Access:
read-write.
Status:
mandatory.
OBJECT:
tl1xnsNetworkAddress { tl1xnsNetworkIntfEntry 2 }
Syntax:
INTEGER
Definition:
This is the XNS network address.
Access:
read-write.
Status:
mandatory.
265